Menu

Wave T1 Mini Pro FAQs

Download

Click the image to join

Q1、How to Use Maono Link with Wave T1 Mini Pro

A：Connecting to a Phone

After removing the transmitter and receiver from the charging case, connect the receiver to the bottom data port of your phone. The app will load the settings interface once the transmitter and receiver are successfully paired.

Note: Currently not available on Huawei HarmonyOS.

For other small-brand devices: Click the link below to download Maono Link: Download Here 🔻

 

Q2、How to Connect Wave T1 Mini Pro to a Mobile Phone

A：Take out the transmitter and receiver, then press and hold the power button on the transmitter for 2 seconds to power it on. Next, plug the receiver into the data port at the bottom of your phone. A steady blue light indicates a successful connection.

Note: The connection procedure is identical for iPhone 14 and earlier models; only the adapter type differs.

 

Q3、The Wave T1 Mini Pro battery life is less than 5 hours, with short endurance.

A：Battery life can reach 5 hours when using the original sound mode.
 
When noise cancellation is turned on, extra processing power is required to handle noise reduction, which will lead to a noticeable drop in battery runtime.
 
This is a normal occurrence.
 

Q4、No Response After Connecting Wave T1 Mini Pro to Mobile Phone

A：For some OPPO/VIVO phones, enable OTG in phone settings before connecting the microphone. Also, set the default recording device to external device.

As shown below:

 OTG Settings

 

Q5、How to adjust the gain on the Wave T1 Mini Pro?

A：Please use the Maono Link software to adjust the gain in real time for optimal audio performance.
 

Q6、How to charge the Wave T1 Mini Pro?

A：A Slow-flashing red indicator light on the transmitter means low battery. Follow the steps below to charge:
Take out the transmitter , peel off the insulating film on their bottom, then place them into the charging case to charge.
 

Q7、Does the Type-C phone version of Wave T1 Mini Pro support iPhone 15 and 16?

 A：The Type-C version of Wave T1 Mini Pro is compatible with iPhone 15 and iPhone 16 series.
 
 

Q8、What is the maximum transmission range of the Wave T1 Mini Pro?

A：In an open environment free of signal interference:

- Handheld phone, face-to-face recording: Max transmission range exceeds 100 meters;
- Handheld phone, back-to-back recording: Max transmission range exceeds 10 meters;
- Phone fixed on a stand, face-to-face recording: Max transmission range exceeds 150 meters;
- Phone fixed on a stand, back-to-back recording: Max transmission range is about 30 meters.

 

Q9、How to pair Wave T1 Mini Pro?

A：1、Connect the receiver to your phone.

2、With the transmitter powered off, press and hold the power button for 6 seconds. Release the button once the indicator flashes rapidly.

3、The status indicator flashes blue during pairing.

4、When pairing succeeds, the indicator turns solid blue.

 

Q10、Does the Wave T1 Mini Pro support noise cancellation? How to turn it on?

A：Press the noise cancellation button on either the transmitter to enable or disable the function; the indicator light will turn green when activated.
 
Noise reduction levels can be adjusted via both the Maono Link software and the receiver, with three preset modes available: Slight, Moderate, and Aggressive.
 

Q11、 What should I do if the recording volume of the Wave T1 Mini Pro is too low?

A：You can adjust the output volume in real time using the software gain adjustment function within the Maono Link app.
 

Q12、How to play back the recorded audio and video captured by the Wave T1 Mini Pro through the phone's built-in speaker?

A：Enable the phone speaker output function in the Maono Link app, then you can play your recorded media files directly.
 

Q13、The camera trigger function does not respond when triple-tapping the noise cancellation button on Wave T1 Mini Pro.

A：This function only works when your phone is on the photo or video recording interface.
 
 

Q14、Does the Wave T1 Mini Pro support connection to cameras?

A：Yes. It works with selected action cameras such as the DJI Pocket 3.
 

Q15、How to activate the microphone mute function on the Wave T1 Mini Pro?

A：Double-tap the noise reduction button on the transmitter to turn the mute function on or off.
 

Q16、How to enable stereo mode on the Wave T1 Mini Pro?

A：The mono or stereo mode options will only become available once two transmitters are successfully connected simultaneously.
 

Q17、How to enable the color identification indicator lights on the Wave T1 Mini Pro transmitters?

A：This function is disabled by default at the factory and needs to be toggled manually within the Maono Link app.
 
When noise cancellation is active, the transmitter will display green light as priority. Turning off noise cancellation will reveal the distinct color indicator assigned to each transmitter.
 

Q18、How to enable the reverberation function on the Wave T1 Mini Pro?

A：You need to manually toggle the reverb switch within the Maono Link app, and select different reverb intensity levels as needed.
 

Q19、How to upgrade the firmware of the Wave T1 Mini Pro?

A：Open the option menu by tapping the icon at the top right corner inside the Maono Link app. Select "Firmware Upgrade" to scan for available new firmware versions; detailed version information will be displayed on the interface once an update is detected.

Tap "Firmware Upgrade" to start the installation process. After the upgrade finishes, reconnect the microphone to ensure the new firmware takes full effect.

Important Notes:

1.The firmware update cannot be completed if any transmitter (TX) has less than 20% battery power. Please make sure all transmitters are sufficiently charged before updating.

2.On the PC version of Maono Link, the yellow dot reminder for firmware upgrade in the top-right corner will not appear if any transmitter (TX) battery level drops below 20%.

 

Q20、How many devices can Wave T1 Mini Pro connect to simultaneously at maximum?

2 devices

 

Q21、How to switch to Stereo mode on Wave T1 Mini Pro?

Connect two microphones simultaneously, then click the Stereo icon on the Maono Link homepage to switch modes.

 

Q22、What recording formats does Wave T1 Mini Pro support?

When recording via Maono Link, the default format is 48kHz / 16-bit PCM audio. When the T1 Mini Pro is connected to a computer and used with third-party software, 48kHz / 24-bit recording is supported.

 
Q23、How do I restore Wave T1 Mini Pro to factory defaults?
 
Mobile App: After successful pairing, open MaonoLink and navigate to the device details page. Tap the more‑options icon in the top‑right corner, select Factory Reset, then tap Confirm.
 
Desktop App: After successful pairing, open MaonoLink and navigate to the device details page. Click the more‑options icon in the top‑right corner, select Firmware Update, click Factory Reset, then click Yes.
 
 
Q24、Troubleshooting for Wave T1 Mini Pro Abnormal Disconnection

After successful pairing, open the MaonoLink app on your phone and enter the device details page. Tap the More icon in the top‑right corner, then tap Restore Factory Defaults at the top‑right and confirm.

Note: Do not unplug the wireless receiver during the factory reset. Keep the microphone near the wireless receiver to avoid reset failure.

Previous
Wave T1 Mini Pro
Next
Wave T1 Mini Pro Mobile APP User Guide
Last modified: 2026-09-23