Microphone Type<\/span><\/span><\/th>\n	Dynamic<\/span><\/span><\/th>\n<\/tr>\n<\/thead>\n
Polar Pattern<\/span><\/span><\/td>\n	Cardioid<\/span><\/span><\/td>\n<\/tr>\n
Sensitivity<\/span><\/span><\/td>\n	USB: -1.0 dBFS at 1KHz 89dBSPL 0.5m MAX GAIN XLR:-55dBV at 1KHz 94dBSPL 0.5m<\/span><\/span><\/td>\n<\/tr>\n
Noise Reduction<\/span><\/span><\/td>\n	3 Preset (Slight, Moderate, Aggressive) Custome (0~20, set on Maono Link)<\/span><\/span><\/td>\n<\/tr>\n
Max. SPL<\/span><\/span><\/td>\n	USB: 128dB (0.5m Min Gain & Max Vol THD 10%) XLR: 147dB SPL (1kHz 94dB 0.5m)<\/span><\/span><\/td>\n<\/tr>\n
Frequency Response<\/span><\/span><\/td>\n	50-16000Hz<\/span><\/span><\/td>\n<\/tr>\n
Adjustable Gain Range<\/span><\/span><\/td>\n	0~+36dB<\/span><\/span><\/td>\n<\/tr>\n
Monitoring Sensitivity<\/span><\/span><\/td>\n	-1.0dBV at 1KHz 89dBSPL 0.5m MAX GAIN&VOL<\/span><\/span><\/td>\n<\/tr>\n
Monitor The Headphone Jack<\/span><\/span><\/td>\n	3.5mm<\/span><\/span><\/td>\n<\/tr>\n
Digital Output<\/span><\/span><\/td>\n	USB C<\/span><\/span><\/td>\n<\/tr>\n
Simulated Output<\/span><\/span><\/td>\n	XLR<\/span><\/span><\/td>\n<\/tr>\n
Internal Recording Time<\/span><\/span><\/td>\n	55h (48kHz\/24bit)<\/span><\/span><\/td>\n<\/tr>\n
Output Impedance Of The Headphone Jack<\/span><\/span><\/td>\n	32 Ω<\/span><\/span><\/td>\n<\/tr>\n
Battery<\/span><\/span><\/td>\n	3200mAh, 3.7V (9.62Wh)<\/span><\/span><\/td>\n<\/tr>\n
Charging Power Supply<\/span><\/span><\/td>\n	USB C, 5V=1A Max.<\/span><\/span><\/td>\n<\/tr>\n
Battery Usage Time<\/span><\/span><\/td>\n	~60h(Based on Maono laboratory tests)<\/span><\/span><\/td>\n<\/tr>\n
Wireless Working Distance<\/span><\/span><\/td>\n	100m Max.(under line-of-sight conditions, based on Maono laboratory tests)<\/span><\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>","pure_content":"Contents\n\n\nI. Device Connections and Software Setup\n\n\nII. Volume, Mute, and Headphone Monitoring\n\n\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n\n\nIV. Recording and File Management\n\n\nV. Battery, Indicators, and Status Display\n\n\nVI. Installation, Positioning, and Maintenance\n\n\nVII. Audio Specifications and Polar Pattern\n\n\nI. Device Connections and Software Setup\n1. How to connect the PD500W to a computer?\nIt supports two connection methods: wireless and wired.\n\n\nWireless Connection: Plug the wireless receiver into your computer's USB port. Power on the microphone. A solid green mute indicator light means pairing is successful.\n\n\nWired Connection: Use a USB-C cable to connect the Type-C port on the microphone to the USB port of your computer. The device will connect automatically, and no power-on operation is required.\n\n\n2. How to complete wireless pairing for PD500W Receiver\nPress and hold the microphone power button for 3 seconds to power on. After plugging the receiver into your device, the microphone will pair with the receiver automatically. The microphone mute indicator will change from flashing blue to solid green when pairing succeeds, and the corresponding indicator on the receiver will also stop flashing and stay lit. For dual-microphone connection (one wireless receiver paired with two microphones), both indicators on the receiver will remain steadily lit.\nManual Pairing\nIf the microphone fails to connect to the receiver after powering on, or the connection is interrupted due to anomalies, follow the steps below for manual pairing:\n\n\nPower off the microphone first, then press and hold the power button for 5 seconds to enter quick pairing mode. The microphone mute indicator will flash blue rapidly.\n\n\nReinsert the receiver into your device. Pairing is complete when the receiver indicator stays steady and the microphone mute indicator turns green.\n\n\n3. How many microphones can one receiver connect to at most?\nTwo. It supports up to one-to-two mode.\n4. How to tell TX1 and TX2 apart when two microphones are connected simultaneously?\nGo to the device page in Maono Link and open the RX General Settings , then enable microphone identification. Once activated, the mute indicator of TX1 will flash purple briefly, while the mute indicator of TX2 will flash cyan briefly.\n\nThe above image is for illustration purposes only.\n5. How do I set up audio input and output on my computer?\nAfter connecting the PD500W, open your computer\u2019s sound settings and select the appropriate input device:\n\n\nWireless receiver connection: Select Maono Wireless Mic RX.\n\n\nUSB cable connection: Select Maono PD500W Mic USB.\n\n\nOn Windows, go to Settings > System > Sound. On macOS, go to System Settings > Sound.\nIf your headphones are connected to the microphone and you want to hear computer audio through them, select the corresponding Maono device as your computer\u2019s audio output as well.\n6. How to Connect the PD500W to Your Audio Interface\nConnection Method: Use a standard 3-pin XLR female-to-male audio cable, plug one end into the XLR port on the bottom of the microphone, and connect the other end to a sound card, mixer, or audio interface.\nPower Requirements: The PD500W is a dynamic microphone, and there is no need to enable 48V phantom power in XLR mode. Enabling 48V generally will not damage the microphone, but it is recommended to turn it off to reduce potential noise.\n7. Do the microphone\u2019s buttons and sound effects work when using an XLR connection?\nWhen connected to a mixer or audio interface via XLR, the PD500W outputs an unprocessed audio signal. The microphone\u2019s onboard controls and digital sound effects do not affect the XLR output.\nAdjust gain and apply effects through your mixer, audio interface, or recording software.\nThe PD500W is a dynamic microphone and does not require 48V phantom power when connected via XLR.\n8. How do I select the PD500W in Adobe Audition?\nAfter connecting the microphone, open Audio Hardware settings in Adobe Audition and select the appropriate Maono input device:\n\n\nWireless connection: Maono Wireless Mic RX.\n\n\nUSB cable connection: Maono PD500W Mic USB.\n\n\n9. Where can I download Maono Link?\nVisit the software download page on the official Maono website and download the version of Maono Link for your device.\nMaono Link supports Windows, macOS, iOS, and Android. Download\n10. Maono Link Software Can't Detect the Device?\n\n\nMake sure to use a cable with data transfer capability (charging-only cables cannot transfer data).\n\n\nConfirm that the microphone is not in \u201cUSB drive mode\u201d (orange light status), after exporting the files, please press and hold the onboard recording button to exit USB drive mode before opening the software.\n\n\nTry unplugging and reconnecting the USB port or switching to a USB port on the back panel of the computer.\n\n\n11. The PD500W supports Mac, especially M-series chips.\nAfter multiple rounds of testing, functionality has been verified with no issues. Due to lower performance, Intel-series chips may experience issues with 192kHz recording.\nII. Volume, Mute, and Headphone Monitoring\n1. What are the functions of the knob on the microphone?\n Short press the knob to switch adjustment modes.\n\n\nWhen the mute indicator light is white: Gain adjustment mode. Turn the knob clockwise to increase microphone gain, and counterclockwise to decrease it.\n\n\nWhen the mute indicator light is blue: Headphone volume adjustment mode. Turn the knob clockwise to raise headphone volume, and counterclockwise to lower it.\n\n\n2. How to control monitor output?\nCheck Mic to monitor audio from the microphone. Check PC to monitor sound from your computer.\n\nThe above image is for illustration purposes only.\n3. How to adjust the headphone monitoring volume of the microphone?\n\u2460 Enter the device interface in Maono Link, find Microphone Monitor, and adjust the slider.\n\nThe above image is for illustration purposes only.\n\u2461 Short press the knob on the microphone. When the mute indicator light turns blue, you can adjust the headphone monitoring volume. Turn the knob clockwise to increase the volume.\n4. How to adjust the microphone speaking volume?\n\u2460 Go to the device interface in the software and adjust the Microphone gain. Higher gain delivers louder sound but also more background noise. Please set it to a proper level.\n\nThe above image is for illustration purposes only.\n\u2461 Short press the microphone knob. When the mute indicator light turns white, you can adjust the microphone gain. Turning the knob clockwise increases the gain.\n5. How to switch auto gain?\nLocate Microphone gain on the device interface in the software and enable Auto Gain. Select a suitable gear based on your distance to the microphone.\n\nThe above image is for illustration purposes only.\n6. How do I mute the microphone? Does setting the gain to 0 mute it?\nYou can mute or unmute the microphone in either of the following ways:\n\n\nTap the touch-sensitive mute button on the microphone.\n\n\nOpen the device page in Maono Link and click the microphone mute icon.\n\n\nSetting the gain to 0 does not mute the microphone. Gain controls how much the microphone signal is amplified. To mute the microphone, use the mute function.\nThese mute controls do not affect the XLR output.\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n1. How to enable noise cancellation?\n\u2460Enable via Maono Link\n\n\nOpen Maono Link\nOpen the software and enter the device interface.Four levels are available: Slight, Moderate, Aggressive and Custom.\nThey correspond to indicator lights on the side of the microphone: white, light green, green and orange.\n\n\nEnable via Maono Link\nTap the noise cancellation level options shown in the interface.\n\n\n\nThe above image is for illustration purposes only.\n\u2461 On the microphone\nShort press the noise cancellation button to cycle through modes: Slight \u2192 Moderate \u2192 Aggressive \u2192 Custom.\n\u2462 On the receiver\nShort press the noise cancellation button on the receiver to cycle through modes: Slight \u2192 Moderate \u2192 Aggressive \u2192 Custom.\n2. What are the functions of the compressor and limiter?\n\n\nCompressor: Stabilizes audio signals and prevents inconsistent volume levels.\n\n\nLimiter: Prevents audio clipping caused by excessive volume.\n\n\n3. What do Mono, Stereo and Safety Track below the level meter mean?\n\n\nMono: Combines audio signals into a single channel. The left and right channels output identical audio.\n\n\nStereo: When the receiver (RX) is connected to two microphones, the left and right channels will output separate tracks from each microphone respectively.\n\n\nSafety Track: Two audio streams are output on left and right channels. The left channel plays audio at the original volume, while the right channel serves as a backup track with volume reduced by 9dB.\nNote: The safety audio track is compatible with both the mobile receiver and camera receiver.\n\n\n4. How do I enable the digital pop filter?\nOpen Maono Link, go to the PD500W device page, and enable the digital pop filter.\n5. How do I select, customize, or reset a sound preset?\nOpen the device page in Maono Link and go to the sound presets section:\n\n\nSelect a preset: Choose an existing preset that suits your needs.\n\n\nCreate a custom preset: Click the option to create a new preset, then adjust the gain and Q value of each EQ band to fine-tune your sound.\n\n\nReset a preset: Open the preset\u2019s editing page and click Reset.\n\n\nStart with the default settings and make small adjustments while listening to the results. EQ helps refine your vocal tone; it cannot make your voice sound like someone else\u2019s.\n6. Should I choose Mono, Stereo, or Safety Track?\n\n\nMono: Suitable for calls, livestreams, and general recording. The same audio is sent to both the left and right channels.\n\n\nStereo: Suitable when two microphones are connected to one receiver and you want to edit each speaker\u2019s audio separately. Each microphone is assigned to a separate channel: one to the left and the other to the right.\n\n\nSafety Track: Useful when recording audio with large volume changes. The left channel carries the original audio level, while the right channel carries a backup signal that is 9 dB lower for use in post-production.\n\n\nFor recordings that will be played back directly with matching audio in both channels, choose Mono.\n7. Can I use Safety Track with one microphone? Why is the right channel quieter?\nYes. Safety Track can be used with a single microphone in wireless receiver mode.\nThe right channel is intentionally 9 dB quieter than the left channel. It provides a lower-level backup signal that you can use during editing.\nAvoid publishing the unedited Safety Track recording as your final stereo audio, as listeners will hear different volume levels in the left and right channels. Before publishing, select the appropriate track and adjust the final channel routing and audio level.\nIV. Recording and File Management\n1. How to enable Internal Recording?\n1. On the microphone\nShort press the InternalRecording button to start InternalRecording; the red indicator light on the side will turn on. Long press for 3 seconds again to stop recording.\n2. Via Maono Link software\nClick the InternalRecording button to enable\/disable InternalRecording.\n\nThe above image is for illustration purposes only.\n2. How to export the recorded audio files?\nAfter disabling internal recording, connect the microphone to your phone or computer with a USB-C cable. Press and hold the Internal Recording button for 5 seconds. When the recording indicator lights up orange, you can transfer the files to your device\uff08 It currently supports Windows, iOS and Android systems\uff09.\nFor Windows PC\n\n\nConnect the microphone to your computer using a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button on the microphone for 5 seconds, or enable USB drive mode in the Maono Link software. Make sure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, indicating USB drive mode is activated.\n\n\n\nOpen This PC and access the external storage device.\n\n\nLocate the recorded audio files and copy them to your device.\n\n\nFor Android Phones\n\n\nConnect the microphone to your phone with a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button for 5 seconds. Ensure internal recording is disabled before activating USB drive mode. The microphone mute indicator will turn orange, meaning USB drive mode is enabled.\n\n\nOpen the Files app on your phone and open the connected external storage.\n\n\nYou can find the recorded audio files here and copy them over.\n\n\nFor iPhone\n\n\nConnect the microphone to your iPhone using a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button for 5 seconds. Ensure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, confirming USB drive mode is activated.\n\n\nOpen the Files app, then locate and open the external storage under Locations.\n\n\nFind your recorded audio files here and copy them to your phone.\n\n\n3. What are the original and processed audio files from Internal Recording?\n\n\nOriginal file: Raw audio recorded without any processing.\n\n\nProcessed file: Audio optimized by algorithms, such as noise cancellation and EQ adjustments.\n\n\n4. How to enable\/disable auto-recording on boot?\nOpen the device interface in Maono Link, locate Internal Recording, tap Settings, then enable or disable Auto-recording.\n\n\nThe above image is for illustration purposes only.\n5. How to clear internal recording files when storage is full?\nIn the device interface of the software, find Internal Recording, click Format, and confirm.\n\nThe above image is for illustration purposes only.\nV. Battery, Indicators, and Status Display\n1. The level meters in the software show no response, but recording works normally?\nCheck if the level meter switch is turned on.\n\u2460 Click the Settings icon in the top-right corner of the software\u2019s device interface.\n\n\u2461 Check whether the level meter switch is enabled.\n\nThe above image is for illustration purposes only.\n2. How do I check the microphone\u2019s remaining battery level?\nConnect the microphone, open Maono Link, and check the current battery level on the device page.\n3. Battery Life, Charging, and Power Management\nBattery Life: The built-in lithium battery can operate continuously for approximately 60 hours in wireless mode (battery life will be correspondingly shorter when onboard recording\/DSP is enabled). Charging Method: Charge via the USB-C port using a standard 5V\/1A adapter or a computer USB port, and a full charge takes approximately 4 hours. Use While Charging: Supports use while charging. When connected to a computer via USB cable, the device will automatically charge at the same time. Low\nBattery Alert: When the battery level is below 10%, the power indicator will flash red, please charge it promptly to prevent abnormal interruption of onboard recording data.\n4. The PD500W has a built-in battery. Will battery aging eventually make the microphone unusable?\nThe PD500W's internal battery is primarily used for wireless operation. Even if the battery capacity gradually decreases after extended use, it does not mean the entire microphone becomes unusable. The PD500W can still be used through wired connections such as USB-C or XLR. To support both wireless runtime and long-term reliability, the PD500W uses a 3200mAh LG battery cell. Under controlled cycle-life testing, the battery is specified to retain at least 80% of its initial capacity after 1,000 full charge and discharge cycles. Like other lithium-ion batteries, its capacity will gradually decrease with age and repeated charging rather than suddenly failing after a fixed number of years. Cycle-life specification: tested at 25\u00b0C, with charging at 0.3C and discharging at 0.5C. Actual battery performance may vary depending on temperature, charging habits, product settings, and usage conditions.\nVI. Installation, Positioning, and Maintenance\n1. How to restore default settings?\n\u2460 Click the Firmware Update icon in the top-right corner of the device interface.\n\nThe above image is for illustration purposes only.\n\u2461 Click Factory Reset\n\nThe above image is for illustration purposes only.\n2. Can I remove the microphone body from the original yoke and reinstall it in the opposite orientation?\nThe microphone body cannot be removed from the original yoke. The PD500W features a hidden-cable yoke design with an integrated FPC ribbon cable inside. Attempting to remove or reverse the microphone body may damage the internal cable and the microphone. To adjust the microphone angle, please use the yoke's built-in angle adjustment.\n3. When using a boom arm, the control knobs end up facing downward and are difficult to access. How should I position the microphone?\nIf the controls face downward when the PD500W is mounted on a boom arm, we recommend positioning the microphone horizontally or at a side angle rather than mounting it upside down. This keeps the controls within easy reach without having to remove or reverse the microphone body in the yoke.\n4. The pop filter is very tight and difficult to remove. Is there an easier way to take it off?\nThe pop filter is designed with a secure fit to keep it firmly in place during use. To remove it, grip the pop filter around the mounting ring and gently twist it while pulling outward, similar to unscrewing a bottle cap. This should make it easier to remove than pulling it straight out. Avoid pulling on the mesh portion of the pop filter itself.\n5. How do I properly mount the PD500W to a microphone stand or boom arm with a 3\/8\" or 5\/8\" thread?\nThe bottom of the PD500W yoke supports both 3\/8\" and 5\/8\" threaded mounts. For a 3\/8\" mount, rotate the microphone and yoke assembly onto the stand until securely attached. For a 5\/8\" mount, use the adjustable adapter ring at the bottom and turn the ring clockwise until the microphone is securely mounted. To remove the microphone from the stand or boom arm, simply reverse the corresponding steps.\n6. My XLR cable blocks the boom arm adjustment. What should I do?\nThe PD500W package includes an approximately 3-inch extension pole for this purpose. Install the extension between the bottom of the microphone yoke and the boom arm to create additional clearance. This provides more room for the XLR connector and cable, preventing them from interfering with the microphone's angle adjustment.\nVII. Audio Specifications and Polar Pattern\n1. What is the PD500W\u2019s polar pattern?\nThe PD500W has a cardioid polar pattern. It primarily picks up sound from the front while reducing sound pickup from the sides and rear.\n2. PD500W Microphone Specifications\n\n\n\n Microphone Type\n Dynamic\n\n\n\n\n Polar Pattern\n Cardioid\n\n\n Sensitivity\n USB: -1.0 dBFS at 1KHz 89dBSPL 0.5m MAX GAIN XLR:-55dBV at 1KHz 94dBSPL 0.5m\n\n\n Noise Reduction\n 3 Preset (Slight, Moderate, Aggressive) Custome (0~20, set on Maono Link)\n\n\n Max. SPL\n USB: 128dB (0.5m Min Gain & Max Vol THD 10%) XLR: 147dB SPL (1kHz 94dB 0.5m)\n\n\n Frequency Response\n 50-16000Hz\n\n\n Adjustable Gain Range\n 0~+36dB\n\n\n Monitoring Sensitivity\n -1.0dBV at 1KHz 89dBSPL 0.5m MAX GAIN&VOL\n\n\n Monitor The Headphone Jack\n 3.5mm\n\n\n Digital Output\n USB C\n\n\n Simulated Output\n XLR\n\n\n Internal Recording Time\n 55h (48kHz\/24bit)\n\n\n Output Impedance Of The Headphone Jack\n 32 \u03a9\n\n\n Battery\n 3200mAh, 3.7V (9.62Wh)\n\n\n Charging Power Supply\n USB C, 5V=1A Max.\n\n\n Battery Usage Time\n ~60h(Based on Maono laboratory tests)\n\n\n Wireless Working Distance\n 100m Max.(under line-of-sight conditions, based on Maono laboratory tests)","is_draft":"0","editor_type":"3","file_path":"","add_time":"1780295977","update_time":"1794298610"},"pure_content":"Contents\n\n\nI. Device Connections and Software Setup\n\n\nII. Volume, Mute, and Headphone Monitoring\n\n\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n\n\nIV. Recording and File Management"},{"id":"716820","string_id":"k5yJD9Cy","status":"1","parent_id":"716819","slug":"PD500W-Mobile-User-Guide","order":"3","name":"PD500W Mobile APP User Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"Zoffy","published_time":"1770431121","add_time":"1770088159","update_time":"1792563488","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"716820","content":" <\/div>\n \n \n Product Overview<\/span><\/h2>\n The PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n <\/div>\n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n \n <\/span><\/p>\n Product Functions<\/span><\/h2>\n 1. Connection<\/span><\/h3>\n The receiver of the wireless microphone (Type-C\/Camera RX version) can be directly inserted into your phone's charging port. <\/span><\/p>\n Open the Maono Link APP, and a microphone authorization prompt will pop up for the first use. Click \"OK\" to enable the microphone control functions. If authorization is denied or revoked, you will be unable to connect to Maono Link and configure the microphone settings.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 2. Device Switching<\/span><\/h3>\n When two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 3. Battery Level Display<\/span><\/h3>\n The current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 4. Mute Control<\/span><\/h3>\n Tap the Mic icon (located on the far right) to instantly:<\/span><\/p>\n \u25cf \ud83d\udd07 Mute the microphone<\/strong><\/span><\/p>\n \u25cf \ud83d\udd0a <\/span>Unmute the microphone<\/span><\/strong><\/p>\n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 5. Microphone Gain<\/span><\/h3>\n The microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.<\/span><\/p>\n \u25cf Manual Gain<\/span><\/strong>:<\/strong> Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \u25cf Automatic Gain Control (AGC)<\/span><\/strong>: <\/strong>AWhen auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion. <\/span><\/p>\n \n \u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.<\/span><\/em><\/p>\n<\/blockquote>\n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 6. Noise Reduction<\/span><\/h3>\n The PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.<\/span><\/p>\n \u25cf Preset Noise Reduction<\/span><\/strong>: <\/strong>Offers three noise reduction levels—<\/span>Slight<\/span>, <\/span>Moderate<\/span>, and Aggressive—to adapt to different noisy environments.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \u25cf Custom Noise Reduction<\/span><\/strong>:<\/strong> If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from<\/span> 0 to 20<\/span>.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 7. Internal Recording<\/span><\/h3>\n The internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed.<\/span><\/p>\n \n \u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.<\/span><\/em><\/p>\n<\/blockquote>\n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 7<\/span>.<\/span>1<\/span> Bit Depth<\/span><\/span><\/h4>\n Set the audio bit depth for microphone internal recording. Two options are supported: 24Bit and 32 Bit Float.<\/span><\/p>\n \u25cf 24 Bit<\/span><\/strong>:<\/strong> Standard audio bit depth, suitable for daily recording needs.<\/span><\/p>\n \u25cf 32 Bit Float<\/span><\/strong>: <\/strong>Preserves more complete audio information, expanding the scope for post-audio processing.<\/span><\/p>\n \n \u26a0\ufe0fNote: Enabling 32 Bit float bit depth will increase the file size, thus shortening the total recording duration of the microphone.<\/span><\/em><\/p>\n<\/blockquote>\n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 7.<\/span>2<\/span> File Type<\/span><\/span><\/h4>\n Select the file type for saved internal recordings, with two options available:<\/span><\/p>\n \u25cf Original File<\/span><\/strong>: <\/strong>Raw audio files without any algorithmic processing, retaining the complete original recording information.<\/span><\/p>\n \u25cf Processed File<\/span><\/strong>: <\/strong>Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)<\/span><\/p>\n \n \u26a0\ufe0fNote: The bit depth and file type cannot be modified while internal recording is <\/span>enable<\/span>.<\/span><\/em><\/p>\n<\/blockquote>\n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 7.<\/span>3<\/span> Internal Recording Settings<\/span><\/span><\/h4>\n \u25cf Startup Auto Recor<\/span>ding<\/span>:<\/span> <\/strong>When enabled, the microphone will automatically start recording upon powering on.<\/span><\/p>\n \u25cf Loop Recording<\/span><\/strong>: <\/strong>When enabled, the device will automatically overwrite the earliest recorded files when the TX storage space is full, continuously saving the latest audio content.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 7<\/span>.<\/span>4<\/span> File Export<\/span><\/span><\/h4>\n Press and hold the microphone's internal recording button for 5 seconds to activate USB Drive Mode. Then, connect the microphone to a computer or phone via a USB cable to export the recorded files.<\/span><\/p>\n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 7<\/span>.<\/span>5<\/span> Storage Space<\/span><\/span><\/h4>\n With 24bit bit depth, the device supports up to <\/span>55.3<\/span> hours of recording. With 32 Bit Float bit depth, the supported recording duration is <\/span>45.2<\/span> hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n \n <\/p>\n 8. Compressor & Limiter<\/span><\/h3>\n Basic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.<\/span><\/p>\n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 9. Scenes<\/span><\/h3>\n Multiple preset sound effect configurations are available, calibrated according to the product's features. <\/span>Custom configurations are not yet supported on m<\/span>obile devices. If you need to customize the configuration, please use the desktop version of Maono Link, which provides a full suite of graphical adjustment tools.<\/span><\/p>\n \u25cf <\/span>Origina<\/span>l<\/span><\/span><\/h4>\n 1 basic presets to preserve original sound texture. <\/span><\/p>\n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \u25cf <\/span>Stream<\/span><\/h4>\n 3 presets optimized for distinctive vocal effects during live broadcasts, ready for one-click use.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \u25cf <\/span>Recording<\/span><\/h4>\n 3 presets tailored for different voiceover genres.<\/span><\/p>\n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \u25cf <\/span>Podcast<\/span><\/h4>\n 3 presets optimized for different vocal styles in podcast scenarios.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 10. Microphone Monitoring<\/span><\/h3>\n The PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.<\/span><\/p>\n 1<\/span>0<\/span>.<\/span>1<\/span> Headphone Volume<\/span><\/span><\/h4>\n Adjust the monitoring output volume of the current microphone with one click.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 1<\/span>0<\/span>.<\/span>2<\/span> Monitoring Output<\/span><\/span><\/h4>\n Check the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.<\/span><\/p>\n \u25cf <\/strong>Current Microphone<\/strong><\/span> (e.g., PD500W-1)<\/span>: Monitor your own voice.<\/span><\/p>\n \u25cf Phone<\/span><\/strong>: <\/strong>Monitor background music, game audio, or call sounds (automatically disabled when phone speaker is activated).<\/span><\/p>\n \u25cf Other Microphones <\/strong>(e.g., PD500W-2)<\/span>: Monitor your partner's voice.<\/span><\/p>\n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n Typical Scenarios<\/span><\/em><\/p>\n \u25cf Solo Use<\/span><\/strong><\/p>\n Check \"Local Microphone\" and \"Phone\" to monitor both your own voice and background music simultaneously.<\/span><\/p>\n \u25cf <\/strong>Two-Person Live Stream <\/strong>(with 2 PD500W microphones connected)<\/span>:<\/span><\/p>\n \u25cb Check all audio sources to hear your own voice, your partner's voice, and phone audio at the same time.<\/span><\/p>\n \u25cb Check \"<\/span>Current<\/span> PD500W<\/span>-<\/span>1<\/span>\" and \"Phone\" to only monitor your own voice and background sounds.<\/span><\/p>\n \u25cb Gaming\/Media Playback Only<\/span>: Check only \"Phone\" to get pure audio output from the phone through the headphones.<\/span><\/p>\n \n \u26a0\ufe0fNote: To configure monitoring for the Camera RX, perform the settings directly on the Camera RX device.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n \n <\/p>\n 11. De-Esser<\/span><\/h3>\n Suppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre. <\/p>\n \n \n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n <\/p>\n<\/div>\n<\/div>\n 12. Electronic Pop Filter<\/span><\/h3>\n Enabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.<\/span><\/p>\n \n \n \n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 13. Mic Level Indicator<\/span><\/h3>\n You can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.<\/p>\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 14. Mute Lock<\/span><\/h3>\n When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.<\/p>\n \n \n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n <\/p>\n<\/div>\n<\/div>\n \n <\/p>\n 13. General Functions<\/span><\/h3>\n 1<\/span>3<\/span>.<\/span>1<\/span> Channel Settings<\/span><\/span><\/h4>\n \u25cf Mono<\/span><\/strong>:<\/strong> Merges audio signals into a single channel, with identical audio output from both left and right channels.<\/span><\/p>\n \u25cf Stereo<\/span><\/strong>: <\/strong>When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.<\/span><\/p>\n \u25cf Safety Track<\/span><\/strong>: <\/strong>Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.<\/span><\/p>\n \u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 1<\/span>3<\/span>.<\/span>2<\/span> Microphone Identification<\/span><\/span><\/h4>\n When Microphone Identification is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 1<\/span>3<\/span>.<\/span>3<\/span> External<\/span> Output<\/span><\/span><\/h4>\n When <\/span>External<\/span> Output<\/span> is enabled, sound will be played through the phone's built-in speaker. When disabled, it switches to headphone playback. You can connect 3.5mm headphones to the microphone's monitoring jack for audio monitoring.<\/span><\/p>\n \n \n \n \n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n <\/div>\n<\/div>","pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.\n\n\n\n\n\n\n\n\n\n\n\u00a0\n\n\n\n\n\n\u00a0\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\nProduct Functions\n1. Connection\nThe receiver of the wireless microphone (Type-C\/Camera RX version) can be directly inserted into your phone's charging port. \nOpen the Maono Link APP, and a microphone authorization prompt will pop up for the first use. Click \"OK\" to enable the microphone control functions. If authorization is denied or revoked, you will be unable to connect to Maono Link and configure the microphone settings.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n2. Device Switching\nWhen two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n3. Battery Level Display\nThe current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n4. Mute Control\nTap the Mic icon (located on the far right) to instantly:\n\u25cf\u00a0\ud83d\udd07 Mute the microphone\n\u25cf \ud83d\udd0a\u00a0Unmute the microphone\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n5. Microphone Gain\nThe microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.\n\u25cf\u00a0Manual Gain: Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Automatic Gain Control (AGC): AWhen auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion.\u00a0\n\n\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n6. Noise Reduction\nThe PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.\n\u25cf\u00a0Preset Noise Reduction: Offers three noise reduction levels\u2014Slight, Moderate, and Aggressive\u2014to adapt to different noisy environments.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Custom Noise Reduction: If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from 0 to 20.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n7. Internal Recording\nThe internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed.\n\n\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.1 Bit Depth\nSet the audio bit depth for microphone internal recording. Two options are supported: 24Bit and 32 Bit Float.\n\u25cf\u00a024 Bit: Standard audio bit depth, suitable for daily recording needs.\n\u25cf\u00a032 Bit Float: Preserves more complete audio information, expanding the scope for post-audio processing.\n\n\u26a0\ufe0fNote: Enabling 32 Bit float bit depth will increase the file size, thus shortening the total recording duration of the microphone.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.2 File Type\nSelect the file type for saved internal recordings, with two options available:\n\u25cf\u00a0Original File: Raw audio files without any algorithmic processing, retaining the complete original recording information.\n\u25cf\u00a0Processed File: Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement.\u00a0(Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)\n\n\u26a0\ufe0fNote: The bit depth and file type cannot be modified while internal recording is enable.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.3 Internal Recording Settings\n\u25cf\u00a0Startup Auto Recording: When enabled, the microphone will automatically start recording upon powering on.\n\u25cf\u00a0Loop Recording: When enabled, the device will automatically overwrite the earliest recorded files when the TX storage space is full, continuously saving the latest audio content.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.4 File Export\nPress and hold the microphone's internal recording button for 5 seconds to activate USB Drive Mode. Then, connect the microphone to a computer or phone via a USB cable to export the recorded files.\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.5 Storage Space\nWith 24bit bit depth, the device supports up to 55.3 hours of recording. With 32 Bit Float bit depth, the supported recording duration is 45.2 hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n8. Compressor & Limiter\nBasic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n9. Scenes\nMultiple preset sound effect configurations are available, calibrated according to the product's features. Custom configurations are not yet supported on mobile devices. If you need to customize the configuration, please use the desktop version of Maono Link, which provides a full suite of graphical adjustment tools.\n\u25cf Original\n1 basic presets to preserve original sound texture.\u00a0\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Stream\n3 presets optimized for distinctive vocal effects during live broadcasts, ready for one-click use.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Recording\n3 presets tailored for different voiceover genres.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Podcast\n3 presets optimized for different vocal styles in podcast scenarios.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n10. Microphone Monitoring\nThe PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.\n10.1 Headphone Volume\nAdjust the monitoring output volume of the current microphone with one click.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n10.2 Monitoring Output\nCheck the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.\n\u25cf\u00a0Current Microphone (e.g., PD500W-1): Monitor your own voice.\n\u25cf\u00a0Phone: Monitor background music, game audio, or call sounds (automatically disabled when phone speaker is activated).\n\u25cf\u00a0Other Microphones (e.g., PD500W-2): Monitor your partner's voice.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\nTypical Scenarios\n\u25cf\u00a0Solo Use\nCheck \"Local Microphone\" and \"Phone\" to monitor both your own voice and background music simultaneously.\n\u25cf\u00a0Two-Person Live Stream (with 2 PD500W microphones connected):\n\u25cb\u00a0Check all audio sources to hear your own voice, your partner's voice, and phone audio at the same time.\n\u25cb\u00a0Check \"Current PD500W-1\" and \"Phone\" to only monitor your own voice and background sounds.\n\u25cb\u00a0Gaming\/Media Playback Only: Check only \"Phone\" to get pure audio output from the phone through the headphones.\n\n\u26a0\ufe0fNote: To configure monitoring for the Camera RX, perform the settings directly on the Camera RX device.\n\n\u00a0\n\n\u00a0\n11. De-Esser\nSuppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre.\u00a0\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\n12. Electronic Pop Filter\nEnabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n13. Mic Level Indicator\nYou can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n14. Mute Lock\nWhen enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\n\n\u00a0\n13. General Functions\n13.1 Channel Settings\n\u25cf\u00a0Mono: Merges audio signals into a single channel, with identical audio output from both left and right channels.\n\u25cf\u00a0Stereo: When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.\n\u25cf\u00a0Safety Track: Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.\n\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n13.2 Microphone Identification\nWhen Microphone Identification is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n13.3 External Output\nWhen External Output is enabled, sound will be played through the phone's built-in speaker. When disabled, it switches to headphone playback. You can connect 3.5mm headphones to the microphone's monitoring jack for audio monitoring.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1770088159","update_time":"1792563488"},"pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams"},{"id":"717720","string_id":"PFS3PgTf","status":"1","parent_id":"716819","slug":"PD500W-User-Guide","order":"2","name":"PD500W User Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"Zoffy","published_time":"1770431126","add_time":"1770188783","update_time":"1792545159","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"717720","content":" <\/div>\n \n \n Product Overview<\/span><\/h2>\n The PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.<\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n Product Functions<\/span><\/h2>\n 1. Device Switching<\/span><\/span><\/h3>\n When two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 2. Battery Level Display<\/span><\/span><\/h3>\n The current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n \n <\/p>\n 3. Basic<\/span>s<\/span><\/span><\/h3>\n 3<\/span>.<\/span>1<\/span> Quick Control<\/span><\/h4>\n Mute Switch: <\/strong>Quickly mute or unmute the microphone.<\/p>\n <\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* Mute Lock Switch: <\/strong>When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.<\/p>\n <\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* 3<\/span>.<\/span>2<\/span> Microphone Gain<\/span><\/span><\/h4>\n The microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.<\/span><\/p>\n \u25cf Manual Gain<\/span><\/strong>: <\/strong>Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* \u25cf Automatic Gain Control <\/strong>(AGC)<\/span>: When auto gain is enabled, it <\/span>automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion. <\/span><\/p>\n \n \u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 3<\/span>.<\/span>3<\/span> Noise Cancellation<\/span><\/span><\/h4>\n The PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.<\/span><\/p>\n \u25cf Preset Noise Cancellation<\/span><\/strong>: <\/strong>Offers three noise reduction levels—<\/span>Slight<\/span>, <\/span>Moderate<\/span>, and Aggressive—to adapt to different noisy environments.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/span><\/p>\n* \u25cf Custom Noise Cncellation<\/span><\/strong>: <\/strong>If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from<\/span> 0 to 20<\/span>.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/span><\/p>\n* 3<\/span>.<\/span>4<\/span> Internal Recording<\/span><\/span><\/h4>\n The internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed. The internal recording file is mono; stereo and safety track are not supported.<\/span><\/p>\n \n \u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n Dual Mic Record<\/span><\/strong><\/h5>\n When two PD500W microphones are connected simultaneously, single-mic or dual-mic recording modes are available.<\/span><\/span><\/p>\n Single-mic mode only records the active microphone. Select dual-mic recording for synchronous internal recording of both mics, and both units will start capturing audio at the same time.<\/span><\/span><\/p>\n <\/span><\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/span><\/span><\/p>\n <\/p>\n Bit Depth<\/span><\/strong><\/span><\/h5>\n Set the audio Bit depth for microphone internal recording. Two options are supported: 24 Bit and 32-Bit Float.<\/span><\/p>\n \u25cf 24 Bit<\/span><\/strong>: <\/strong>Standard audio Bit depth, suitable for daily recording needs.<\/span><\/p>\n \u25cf 32 Bit Float<\/span><\/strong>: <\/strong>Preserves more complete audio information, expanding the scope for post-audio processing.<\/span><\/p>\n \n \u26a0\ufe0fNote: Enabling 32 Bit Float Bit depth will increase the file size, thus shortening the total recording duration of the microphone.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n File Type<\/span><\/strong><\/h5>\n Select the file type for saved internal recordings, with two options available:<\/span><\/p>\n \u25cf Original File<\/span><\/strong>: <\/strong>Raw audio files without any algorithmic processing, retaining the complete original recording information.<\/span><\/p>\n \u25cf Processed File<\/span><\/strong>:<\/strong> Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)<\/span><\/p>\n \n \u26a0\ufe0fNote: The Bit depth and file type cannot be modified while internal recording is <\/span>enable<\/span>.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n Internal Recording Settings<\/span><\/strong><\/h5>\n \u25cf Startup Auto Recor<\/span>ding<\/span>:<\/span> <\/strong>When enabled, the mic will automatically start recording upon powering on.<\/span><\/p>\n \u25cf Low Power Auto Recording<\/span><\/strong>: <\/strong>When enabled, the mic will automatically start recording when the RX battery level drops to 10%, ensuring critical audio material is not lost.<\/span><\/p>\n \u25cf Loop Recording<\/span><\/strong>:<\/strong> When enabled, the device will automatically overwrite the earliest recorded files when the mic storage space is full, continuously saving the latest audio content.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* File Export<\/span><\/strong><\/h5>\n Connect the microphone to your computer or mobile device via a USB cable. Press and hold the internal recording button on the microphone for 5 seconds to enter USB drive mode (the microphone light strip will turn orange), then you can export audio files.<\/span><\/p>\n USB drive mode can be exited by re-plugging the device, restarting the unit, or pressing and holding the internal recording button for another 5 seconds.<\/span><\/p>\n \n \n <\/span><\/p>\n<\/div>\n<\/div>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n \n \u26a0\ufe0fNotes: USB drive mode cannot be activated during internal recording. You must manually stop internal recording first, then enter USB drive mode by either holding the mic recording button for 5 seconds or tapping the USB Mode button in the software.<\/em><\/p>\n<\/blockquote>\n Storage Space<\/span><\/strong><\/h5>\n With 24Bit Bit depth, the device supports up to 55.3<\/span> hours of recording. With 32-Bit Float Bit depth, the supported recording duration is 45.2<\/span> hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.<\/span><\/p>\n <\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 3<\/span>.<\/span>5<\/span> De-Esser<\/span><\/span><\/h4>\n Suppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre. <\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n <\/p>\n 3<\/span>.<\/span>6<\/span> Compressor & Limiter<\/span><\/span><\/h4>\n Basic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 3<\/span>.<\/span>7<\/span> Electronic Pop Filter<\/span><\/span><\/h4>\n Enabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.<\/span><\/p>\n <\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 3.8 Microphone Monitoring<\/span><\/h4>\n The PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.<\/span><\/p>\n <\/span><\/p>\n Headphone Volume<\/span><\/strong><\/span><\/h5>\n Adjust the monitoring output volume of the current microphone with one click.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n Monitoring Output<\/span><\/strong><\/span><\/h5>\n Check the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.<\/span><\/p>\n \u25cf Current Microphone<\/span><\/strong> (e.g., PD500W-1)<\/span>: Monitor your own voice.<\/span><\/p>\n \u25cf Computer<\/span><\/strong>: <\/strong>Monitor background music, game audio, or call sounds.<\/span><\/p>\n \u25cf Other Microphones <\/strong>(e.g., PD500W-2)<\/span>: Monitor your partner's voice.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* 3<\/span>.<\/span>9<\/span> Mic Level Indicator<\/span><\/span><\/h4>\n You can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.<\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n 3<\/span>.<\/span>9<\/span> General Functions<\/span><\/span><\/h4>\n Microphone Recognition<\/span><\/span><\/strong><\/p>\n When Microphone Recognition is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain. Meanwhile, tapping the icon of a microphone will trigger two quick flashes on its identification indicator light for fast recognition of the corresponding mic.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/span><\/p>\n* \n <\/p>\n 4. Scenes<\/span><\/span><\/h3>\n The software includes four preset scenes: \u200b\u200bOriginal\u200b\u200b, Stream<\/span>,<\/span> R<\/span>e<\/span>c<\/span>o<\/span>r<\/span>d<\/span>i<\/span>n<\/span>g<\/span> and \u200b\u200b<\/span>P<\/span>o<\/span>d<\/span>c<\/span>a<\/span>s<\/span>t<\/span>. Each scene includes optimized audio presets tailored to specific use cases. Select the scene that best matches your activity for an optimized audio experience. Clicking on any scene will automatically load its preset sound configuration.<\/span><\/p>\n <\/p>\n 4.1 Sound configurations<\/span><\/h4>\n Preset Sound Effects:<\/span><\/strong> <\/strong>Preset sound configurations cannot be modified. If the effects do not meet your expectations, click the \"Copy\" button to create a a fully customizable copy of the current configuration. This new configuration can then be tuned on-site. <\/span><\/p>\n Custom Sound Effects:<\/span><\/strong> <\/strong>Under each scene, you can create multiple custom sound configurations. <\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* 4.<\/span>2<\/span> Create New<\/span><\/span><\/h4>\n You can create a new custom sound configuration by clicking the \"+\" button in the menu bar below the scene.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/span><\/p>\n 4<\/span>.<\/span>3 Deletion and Editing<\/span><\/span><\/h4>\n The \"More\" menu supports the export and deletion of audio effect configurations.<\/span><\/p>\n Hover the mouse over a custom audio effect box, and the Delete and Edit buttons will appear.<\/span><\/p>\n Delete: <\/strong>Click \"Delete\" to directly remove the current audio effect configuration.<\/span><\/p>\n Edit: <\/strong>Click \"Edit\" to open a pop-up window for adjusting the PEQ tuning of the current configuration.<\/span><\/p>\n <\/span><\/p>\n *The above image is for illustration purposes only.<\/em><\/span><\/p>\n* *<\/p>\n* 4.<\/span>4<\/span> EQ<\/span> Adjustment<\/span><\/span><\/h4>\n Each audio effect configuration includes a graphical EQ tuning feature, comprising an HPF (High-Pass Filter), an LPF (Low-Pass Filter), and 10 bands. By dragging a band, you can directly boost or attenuate the gain at a specific frequency to quickly optimize the microphone's sound.<\/span><\/p>\n You can click on a band or locate it in the parameter panel below to modify its filter type, gain, frequency, and Q value.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n When adjusting the EQ, you can monitor in real-time to hear the effect of the changes. Right-click on an EQ curve to perform actions such as copying, exporting, creating a new curve, or deleting it.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n The EQ Presets panel located in the bottom-right corner of the window provides menu options to create new or import audio effect configurations. Furthermore, right-clicking on any existing preset allows you to modify its curve appearance (thickness and color), rename it, or perform actions like copying and exporting the curve.<\/span><\/p>\n You can export your own configurations to share with friends, or import sound effect files tuned for the PD500W by others. In the future, the official website will offer more scene sound effects for download, which can be used immediately with one-click import after downloading.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n \n <\/p>\n 5. Channel Settings<\/span><\/span><\/h3>\n \u25cf Mono<\/span><\/strong>: <\/strong>Merges audio signals into a single channel, with identical audio output from both left and right channels.<\/span><\/p>\n \u25cf Stereo<\/span><\/strong>:<\/strong> When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.<\/span><\/p>\n \u25cf Safety Track<\/span><\/strong>: <\/strong>Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.<\/span><\/p>\n \n \u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.<\/span><\/em><\/p>\n<\/blockquote>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n \n <\/p>\n 6. Recording<\/span><\/span><\/h3>\n The default recording format is 48kHz\/16Bit, PCM format audio, and audio recorded can be exported to your destination folder.<\/span><\/p>\n <\/span><\/p>\n The above image is for illustration purposes only.<\/em><\/span><\/p>\n <\/p>\n \n <\/span><\/p>\n<\/div>\n<\/div>","pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.\n\u00a0\n\n\u00a0\nProduct Functions\n1.\u00a0 Device Switching\nWhen two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n2.\u00a0 Battery Level Display\nThe current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n3.\u00a0 Basics\n3.1 Quick Control\nMute Switch: Quickly mute or unmute the microphone.\n\nThe above image is for illustration purposes only.\n\u00a0\nMute Lock Switch: When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.2 Microphone Gain\nThe microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.\n\u25cf\u00a0Manual Gain: Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Automatic Gain Control (AGC): When auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion.\u00a0\n\n\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.\n\n\nThe above image is for illustration purposes only.\n\u00a0\n3.3 Noise Cancellation\nThe PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.\n\u25cf\u00a0Preset Noise Cancellation: Offers three noise reduction levels\u2014Slight, Moderate, and Aggressive\u2014to adapt to different noisy environments.\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Custom Noise Cncellation: If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from 0 to 20.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.4 Internal Recording\nThe internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed. The internal recording file is mono; stereo and safety track are not supported.\n\n\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nDual Mic Record\nWhen two PD500W microphones are connected simultaneously, single-mic or dual-mic recording modes are available.\nSingle-mic mode only records the active microphone. Select dual-mic recording for synchronous internal recording of both mics, and both units will start capturing audio at the same time.\n\nThe above image is for illustration purposes only.\n\u00a0\nBit Depth\nSet the audio Bit depth for microphone internal recording. Two options are supported: 24\u00a0Bit and 32-Bit Float.\n\u25cf\u00a024\u00a0Bit: Standard audio Bit depth, suitable for daily recording needs.\n\u25cf\u00a032\u00a0Bit Float: Preserves more complete audio information, expanding the scope for post-audio processing.\n\n\u26a0\ufe0fNote: Enabling 32 Bit Float Bit depth will increase the file size, thus shortening the total recording duration of the microphone.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nFile Type\nSelect the file type for saved internal recordings, with two options available:\n\u25cf\u00a0Original File: Raw audio files without any algorithmic processing, retaining the complete original recording information.\n\u25cf\u00a0Processed File: Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)\n\n\u26a0\ufe0fNote: The Bit depth and file type cannot be modified while internal recording is enable.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nInternal Recording Settings\n\u25cf\u00a0Startup Auto Recording: When enabled, the mic will automatically start recording upon powering on.\n\u25cf\u00a0Low Power Auto Recording: When enabled, the mic will automatically start recording when the RX battery level drops to 10%, ensuring critical audio material is not lost.\n\u25cf\u00a0Loop Recording: When enabled, the device will automatically overwrite the earliest recorded files when the mic storage space is full, continuously saving the latest audio content.\n\nThe above image is for illustration purposes only.\n\u00a0\nFile Export\nConnect the microphone to your computer or mobile device via a USB cable. Press and hold the internal recording button on the microphone for 5 seconds to enter USB drive mode (the microphone light strip will turn orange), then you can export audio files.\nUSB drive mode can be exited by re-plugging the device, restarting the unit, or pressing and holding the internal recording button for another 5 seconds.\n\n\n\n\n\n\u00a0The above image is for illustration purposes only.\n\n\u26a0\ufe0fNotes: USB drive mode cannot be activated during internal recording. You must manually stop internal recording first, then enter USB drive mode by either holding the mic recording button for 5 seconds or tapping the USB Mode button in the software.\n\nStorage Space\nWith 24Bit Bit depth, the device supports up to 55.3 hours of recording. With 32-Bit Float Bit depth, the supported recording duration is 45.2\u00a0hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.5\u00a0De-Esser\nSuppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre.\u00a0\n\nThe above image is for illustration purposes only.\n\u00a0\n3.6 Compressor & Limiter\nBasic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.7 Electronic Pop Filter\nEnabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.8 Microphone Monitoring\nThe PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.\n\u00a0\nHeadphone Volume\nAdjust the monitoring output volume of the current microphone with one click.\n\nThe above image is for illustration purposes only.\n\u00a0\nMonitoring Output\nCheck the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.\n\u25cf\u00a0Current Microphone (e.g., PD500W-1): Monitor your own voice.\n\u25cf\u00a0Computer: Monitor background music, game audio, or call sounds.\n\u25cf\u00a0Other Microphones (e.g., PD500W-2): Monitor your partner's voice.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.9 Mic Level Indicator\nYou can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.9 General Functions\nMicrophone Recognition\nWhen Microphone Recognition is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain. Meanwhile, tapping the icon of a microphone will trigger two quick flashes on its identification indicator light for fast recognition of the corresponding mic.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n4.\u00a0 Scenes\nThe software includes four preset scenes: \u200b\u200bOriginal\u200b\u200b, Stream, Recording and \u200b\u200bPodcast. Each scene includes optimized audio presets tailored to specific use cases. Select the scene that best matches your activity for an optimized audio experience. Clicking on any scene will automatically load its preset sound configuration.\n\u00a0\n4.1 Sound configurations\nPreset Sound Effects: Preset sound configurations cannot be modified. If the effects do not meet your expectations, click the \"Copy\" button to create a a fully customizable copy of the current configuration. This new configuration can then be tuned on-site. \nCustom Sound Effects: Under each scene, you can create multiple custom sound configurations.\u00a0\n\nThe above image is for illustration purposes only.\n\u00a0\n4.2 Create New\nYou can create a new custom sound configuration by clicking the \"+\" button in the menu bar below the scene.\n\nThe above image is for illustration purposes only.\n\u00a0\n4.3 Deletion and Editing\nThe \"More\" menu supports the export and deletion of audio effect configurations.\nHover the mouse over a custom audio effect box, and the Delete and Edit buttons will appear.\nDelete: Click \"Delete\" to directly remove the current audio effect configuration.\nEdit: Click \"Edit\" to open a pop-up window for adjusting the PEQ tuning of the current configuration.\n\nThe above image is for illustration purposes only.\n\u00a0\n4.4 EQ Adjustment\nEach audio effect configuration includes a graphical EQ tuning feature, comprising an HPF (High-Pass Filter), an LPF (Low-Pass Filter), and 10 bands. By dragging a band, you can directly boost or attenuate the gain at a specific frequency to quickly optimize the microphone's sound.\nYou can click on a band or locate it in the parameter panel below to modify its filter type, gain, frequency, and Q value.\n\nThe above image is for illustration purposes only.\n\u00a0\nWhen adjusting the EQ, you can monitor in real-time to hear the effect of the changes. Right-click on an EQ curve to perform actions such as copying, exporting, creating a new curve, or deleting it.\n\nThe above image is for illustration purposes only.\n\u00a0\nThe EQ Presets panel located in the bottom-right corner of the window provides menu options to create new or import audio effect configurations. Furthermore, right-clicking on any existing preset allows you to modify its curve appearance (thickness and color), rename it, or perform actions like copying and exporting the curve.\nYou can export your own configurations to share with friends, or import sound effect files tuned for the PD500W by others. In the future, the official website will offer more scene sound effects for download, which can be used immediately with one-click import after downloading.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n5.\u00a0 Channel Settings\n\u25cf\u00a0Mono: Merges audio signals into a single channel, with identical audio output from both left and right channels.\n\u25cf\u00a0Stereo: When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.\n\u25cf\u00a0Safety Track: Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.\n\n\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n6.\u00a0 Recording\nThe default recording format is 48kHz\/16Bit, PCM format audio, and audio recorded can be exported to your destination folder.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1770188783","update_time":"1789891194"},"pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams"}],"content":{"icon":"","desc":"","content_id":"716819","add_time":"1770088141","update_time":"1779333826","content":"","is_traffic_less":"0","file_type":""},"hot_list":[],"user_read_num":"0","is_auth":"0"},"msg":"Success","code":200}

{"data":{"id":"716819","string_id":"Mx9Kfz6l","status":"1","parent_id":"593412","slug":"pd500w","order":"10","name":"PD500W","type":"1","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","author":"Zoffy","published_time":"0","add_time":"1770088141","update_time":"1790127270","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"1","tags":[],"parent_name":"Microphone","parent_type":"1","parent_slug":"microphone","child":[{"id":"940335","string_id":"zAVymXsk","status":"1","parent_id":"716819","slug":"PD500W-Guide-Video","order":"6","name":"PD500W Guide Video","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1789539553","add_time":"1789538620","update_time":"1792371335","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"940335","content":"

PD500W Microphone First-Time User Tutorial<\/span><\/h2>\n
<\/p>\n
PD500W User Guide - Function Introduction<\/h2>\n
<\/p>\n
Maono Link App Functions for PD500W Hybrid Microphone<\/h2>\n
<\/p>\n
Maono Link Software Functions for PD500W Hybrid Microphone<\/h2>\n
<\/p>","pure_content":"PD500W Microphone First-Time User Tutorial\n\n\n\u00a0\nPD500W User Guide - Function Introduction\n\n\n\u00a0\nMaono Link App Functions for\u00a0PD500W Hybrid Microphone\n\n\n\u00a0\nMaono Link Software Functions\u00a0for PD500W Hybrid Microphone\n\n\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1789538620","update_time":"1792371335"},"pure_content":"PD500W Microphone First-Time User Tutorial\n\n\n\u00a0\nPD500W User Guide - Function Introduction\n\n\n\u00a0\nMaono Link App Functions for\u00a0PD500W Hybrid Microphone\n\n\n\u00a0\nMaono Link Software Functions\u00a0for PD500W Hybrid M"},{"id":"932198","string_id":"Lzq2cY2v","status":"1","parent_id":"716819","slug":"PD500W-User-Manual","order":"5","name":"PD500W User Manual","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1788500212","add_time":"1788500155","update_time":"1793929063","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"932198","content":"
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>\n
$\"\"$ <\/p>","pure_content":"","is_draft":"0","editor_type":"3","file_path":"","add_time":"1788500155","update_time":"1793928450"},"pure_content":""},{"id":"803287","string_id":"2w7BYizY","status":"1","parent_id":"716819","slug":"pd500w-faqs","order":"4","name":"PD500W FAQ","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"PD500W FAQ","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"Zoffy","published_time":"1780379011","add_time":"1780295977","update_time":"1794298610","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"803287","content":"
Contents<\/span><\/h2>\n
\n
\n
I. Device Connections and Software Setup<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
II. Volume, Mute, and Headphone Monitoring<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
III. Noise Cancellation, Sound Effects, and Audio Track Settings<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
IV. Recording and File Management<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
V. Battery, Indicators, and Status Display<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
VI. Installation, Positioning, and Maintenance<\/span><\/a><\/span><\/p>\n<\/li>\n
\n
VII. Audio Specifications and Polar Pattern<\/span><\/a><\/span><\/p>\n<\/li>\n<\/ul>\n
I. Device Connections and Software Setup<\/span><\/h2>\n
1. How to connect the PD500W to a computer?<\/span><\/h3>\n
It supports two connection methods: wireless and wired.<\/span><\/p>\n
\n
\n
Wireless Connection: Plug the wireless receiver into your computer's USB port. Power on the microphone. A solid green mute indicator light means pairing is successful.<\/span><\/p>\n<\/li>\n
\n
Wired Connection: Use a USB-C cable to connect the Type-C port on the microphone to the USB port of your computer. The device will connect automatically, and no power-on operation is required.<\/span><\/p>\n<\/li>\n<\/ol>\n
2. How to complete wireless pairing for PD500W Receiver<\/span><\/h3>\n
Press and hold the microphone power button for 3 seconds to power on. After plugging the receiver into your device, the microphone will pair with the receiver automatically. The microphone mute indicator will change from flashing blue to solid green when pairing succeeds, and the corresponding indicator on the receiver will also stop flashing and stay lit. For dual-microphone connection (one wireless receiver paired with two microphones), both indicators on the receiver will remain steadily lit.<\/span><\/p>\n
Manual Pairing<\/span><\/strong><\/span><\/p>\n
If the microphone fails to connect to the receiver after powering on, or the connection is interrupted due to anomalies, follow the steps below for manual pairing:<\/span><\/p>\n
\n
\n
Power off the microphone first, then press and hold the power button for 5 seconds to enter quick pairing mode. The microphone mute indicator will flash blue rapidly.<\/span><\/p>\n<\/li>\n
\n
Reinsert the receiver into your device. Pairing is complete when the receiver indicator stays steady and the microphone mute indicator turns green.<\/span><\/p>\n<\/li>\n<\/ol>\n
3. How many microphones can one receiver connect to at most?<\/span><\/h3>\n
Two. It supports up to one-to-two mode.<\/span><\/p>\n
4. How to tell TX1 and TX2 apart when two microphones are connected simultaneously?<\/span><\/h3>\n
Go to the device page in Maono Link and open the <\/span>RX General Settings<\/span><\/strong><\/span> , then enable microphone identification. Once activated, the mute indicator of TX1 will flash purple briefly, while the mute indicator of TX2 will flash cyan briefly.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
5. How do I set up audio input and output on my computer?<\/span><\/h3>\n
After connecting the PD500W, open your computer’s sound settings and select the appropriate input device:<\/span><\/p>\n
\n
\n
Wireless receiver connection:<\/span><\/strong><\/span> Select <\/span>Maono Wireless Mic RX<\/span><\/strong><\/span>.<\/span><\/p>\n<\/li>\n
\n
USB cable connection:<\/span><\/strong><\/span> Select <\/span>Maono PD500W Mic USB<\/span><\/strong><\/span>.<\/span><\/p>\n<\/li>\n<\/ul>\n
On Windows, go to <\/span>Settings > System > Sound<\/span><\/strong><\/span>. On macOS, go to <\/span>System Settings > Sound<\/span><\/strong><\/span>.<\/span><\/p>\n
If your headphones are connected to the microphone and you want to hear computer audio through them, select the corresponding Maono device as your computer’s audio output as well.<\/span><\/p>\n
6. How to Connect the PD500W to Your Audio Interface<\/span><\/h3>\n
Connection Method<\/span><\/strong><\/span>: Use a standard 3-pin XLR female-to-male audio cable, plug one end into the XLR port on the bottom of the microphone, and connect the other end to a sound card, mixer, or audio interface.<\/span><\/p>\n
Power Requirements<\/span><\/strong><\/span>: The PD500W is a dynamic microphone, and <\/span>there is no need to enable 48V phantom power<\/span><\/strong><\/span> in XLR mode. Enabling 48V generally will not damage the microphone, but it is recommended to turn it off to reduce potential noise.<\/span><\/p>\n
7. Do the microphone’s buttons and sound effects work when using an XLR connection?<\/span><\/h3>\n
When connected to a mixer or audio interface via XLR, the PD500W outputs an unprocessed audio signal. The microphone’s onboard controls and digital sound effects do not affect the XLR output.<\/span><\/p>\n
Adjust gain and apply effects through your mixer, audio interface, or recording software.<\/span><\/p>\n
The PD500W is a dynamic microphone and does not require 48V phantom power when connected via XLR.<\/span><\/p>\n
8. How do I select the PD500W in Adobe Audition?<\/span><\/h3>\n
After connecting the microphone, open <\/span>Audio Hardware<\/span><\/strong><\/span> settings in Adobe Audition and select the appropriate Maono input device:<\/span><\/p>\n
\n
\n
Wireless connection:<\/span><\/strong><\/span> Maono Wireless Mic RX.<\/span><\/p>\n<\/li>\n
\n
USB cable connection:<\/span><\/strong><\/span> Maono PD500W Mic USB.<\/span><\/p>\n<\/li>\n<\/ul>\n
9. Where can I download Maono Link?<\/span><\/h3>\n
Visit the software download page on the official Maono website and download the version of Maono Link for your device.<\/span><\/p>\n
Maono Link supports Windows, macOS, iOS, and Android. <\/span>Download<\/span><\/a><\/span><\/p>\n
10. Maono Link Software Can't Detect the Device?<\/span><\/h3>\n
\n
\n
Make sure to use a cable with data transfer capability (charging-only cables cannot transfer data).<\/span><\/p>\n<\/li>\n
\n
Confirm that the microphone is not in “USB drive mode” (orange light status), after exporting the files, please press and hold the onboard recording button to exit USB drive mode before opening the software.<\/span><\/p>\n<\/li>\n
\n
Try unplugging and reconnecting the USB port or switching to a USB port on the back panel of the computer.<\/span><\/p>\n<\/li>\n<\/ol>\n
11. The PD500W supports Mac, especially M-series chips.<\/span><\/h3>\n
After multiple rounds of testing, functionality has been verified with no issues. Due to lower performance, Intel-series chips may experience issues with 192kHz recording.<\/span><\/p>\n
II. Volume, Mute, and Headphone Monitoring<\/span><\/h2>\n
1. What are the functions of the knob on the microphone?<\/span><\/h3>\n
Short press the knob to switch adjustment modes.<\/span><\/p>\n
\n
\n
When the mute indicator light is white: Gain adjustment mode. Turn the knob clockwise to increase microphone gain, and counterclockwise to decrease it.<\/span><\/p>\n<\/li>\n
\n
When the mute indicator light is blue: Headphone volume adjustment mode. Turn the knob clockwise to raise headphone volume, and counterclockwise to lower it.<\/span><\/p>\n<\/li>\n<\/ul>\n
2. How to control monitor output?<\/span><\/h3>\n
Check <\/span>Mic<\/span><\/strong><\/span> to monitor audio from the microphone. Check <\/span>PC<\/span><\/strong><\/span> to monitor sound from your computer.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
3. How to adjust the headphone monitoring volume of the microphone?<\/span><\/h3>\n
\u2460 Enter the device interface in Maono Link, find <\/span>Microphone Monitor<\/span><\/strong><\/span>, and adjust the slider.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
\u2461 Short press the knob on the microphone. When the mute indicator light turns blue, you can adjust the headphone monitoring volume. Turn the knob clockwise to increase the volume.<\/span><\/p>\n
4. How to adjust the microphone speaking volume?<\/span><\/h3>\n
\u2460 Go to the device interface in the software and adjust the Microphone gain. Higher gain delivers louder sound but also more background noise. Please set it to a proper level.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
\u2461 Short press the microphone knob. When the mute indicator light turns white, you can adjust the microphone gain. Turning the knob clockwise increases the gain.<\/span><\/p>\n
5. How to switch auto gain?<\/span><\/h3>\n
Locate Microphone gain on the device interface in the software and enable <\/span>Auto Gain<\/span><\/strong><\/span>. Select a suitable gear based on your distance to the microphone.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
6. How do I mute the microphone? Does setting the gain to 0 mute it?<\/span><\/h3>\n
You can mute or unmute the microphone in either of the following ways:<\/span><\/p>\n
\n
\n
Tap the touch-sensitive mute button on the microphone.<\/span><\/p>\n<\/li>\n
\n
Open the device page in Maono Link and click the microphone mute icon.<\/span><\/p>\n<\/li>\n<\/ul>\n
Setting the gain to 0 does not mute the microphone.<\/span><\/strong><\/span> Gain controls how much the microphone signal is amplified. To mute the microphone, use the mute function.<\/span><\/p>\n
These mute controls do not affect the XLR output.<\/span><\/p>\n
III. Noise Cancellation, Sound Effects, and Audio Track Settings<\/span><\/h2>\n
1. How to enable noise cancellation?<\/span><\/h3>\n
\u2460<\/span>Enable via Maono Link<\/span><\/strong><\/span><\/p>\n
\n
\n
Open Maono Link<\/span><\/strong><\/span><\/p>\n
Open the software and enter the device interface.Four levels are available: Slight, Moderate, Aggressive and Custom.<\/span><\/p>\n
They correspond to indicator lights on the side of the microphone: white, light green, green and orange.<\/span><\/p>\n<\/li>\n
\n
Enable via Maono Link<\/span><\/strong><\/span><\/p>\n
Tap the noise cancellation level options shown in the interface.<\/span><\/p>\n<\/li>\n<\/ul>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
\u2461 <\/span>On the microphone<\/span><\/strong><\/span><\/p>\n
Short press the noise cancellation button to cycle through modes: Slight → Moderate → Aggressive → Custom.<\/span><\/p>\n
\u2462 <\/span>On the receiver<\/span><\/strong><\/span><\/p>\n
Short press the noise cancellation button on the receiver to cycle through modes: Slight → Moderate → Aggressive → Custom.<\/span><\/p>\n
2. What are the functions of the compressor and limiter?<\/span><\/h3>\n
\n
\n
Compressor<\/span><\/strong><\/span>: Stabilizes audio signals and prevents inconsistent volume levels.<\/span><\/p>\n<\/li>\n
\n
Limiter<\/span><\/strong><\/span>: Prevents audio clipping caused by excessive volume.<\/span><\/p>\n<\/li>\n<\/ul>\n
3. What do Mono, Stereo and Safety Track below the level meter mean?<\/span><\/h3>\n
\n
\n
Mono<\/span><\/strong><\/span>: Combines audio signals into a single channel. The left and right channels output identical audio.<\/span><\/p>\n<\/li>\n
\n
Stereo<\/span><\/strong><\/span>: When the receiver (RX) is connected to two microphones, the left and right channels will output separate tracks from each microphone respectively.<\/span><\/p>\n<\/li>\n
\n
Safety Track<\/span><\/strong><\/span>: Two audio streams are output on left and right channels. The left channel plays audio at the original volume, while the right channel serves as a backup track with volume reduced by 9dB.<\/span><\/p>\n
Note: The safety audio track is compatible with both the mobile receiver and camera receiver.<\/span><\/p>\n<\/li>\n<\/ul>\n
4. How do I enable the digital pop filter?<\/span><\/h3>\n
Open Maono Link, go to the PD500W device page, and enable the digital pop filter.<\/span><\/p>\n
5. How do I select, customize, or reset a sound preset?<\/span><\/h3>\n
Open the device page in Maono Link and go to the sound presets section:<\/span><\/p>\n
\n
\n
Select a preset:<\/span><\/strong><\/span> Choose an existing preset that suits your needs.<\/span><\/p>\n<\/li>\n
\n
Create a custom preset:<\/span><\/strong><\/span> Click the option to create a new preset, then adjust the gain and Q value of each EQ band to fine-tune your sound.<\/span><\/p>\n<\/li>\n
\n
Reset a preset:<\/span><\/strong><\/span> Open the preset’s editing page and click <\/span>Reset<\/span><\/strong><\/span>.<\/span><\/p>\n<\/li>\n<\/ul>\n
Start with the default settings and make small adjustments while listening to the results. EQ helps refine your vocal tone; it cannot make your voice sound like someone else’s.<\/span><\/p>\n
6. Should I choose Mono, Stereo, or Safety Track?<\/span><\/h3>\n
\n
\n
Mono:<\/span><\/strong><\/span> Suitable for calls, livestreams, and general recording. The same audio is sent to both the left and right channels.<\/span><\/p>\n<\/li>\n
\n
Stereo:<\/span><\/strong><\/span> Suitable when two microphones are connected to one receiver and you want to edit each speaker’s audio separately. Each microphone is assigned to a separate channel: one to the left and the other to the right.<\/span><\/p>\n<\/li>\n
\n
Safety Track:<\/span><\/strong><\/span> Useful when recording audio with large volume changes. The left channel carries the original audio level, while the right channel carries a backup signal that is 9 dB lower for use in post-production.<\/span><\/p>\n<\/li>\n<\/ul>\n
For recordings that will be played back directly with matching audio in both channels, choose <\/span>Mono<\/span><\/strong><\/span>.<\/span><\/p>\n
7. Can I use Safety Track with one microphone? Why is the right channel quieter?<\/span><\/h3>\n
Yes. Safety Track can be used with a single microphone in wireless receiver mode.<\/span><\/p>\n
The right channel is intentionally 9 dB quieter than the left channel. It provides a lower-level backup signal that you can use during editing.<\/span><\/p>\n
Avoid publishing the unedited Safety Track recording as your final stereo audio, as listeners will hear different volume levels in the left and right channels. Before publishing, select the appropriate track and adjust the final channel routing and audio level.<\/span><\/p>\n
IV. Recording and File Management<\/span><\/h2>\n
1. How to enable Internal Recording?<\/span><\/h3>\n
1. On the microphone<\/span><\/strong><\/span><\/p>\n
Short press the <\/span>Internal<\/span><\/strong><\/span>Recording button to start <\/span>Internal<\/span><\/strong><\/span>Recording; the red indicator light on the side will turn on. Long press for 3 seconds again to stop recording.<\/span><\/p>\n
2. Via Maono Link software<\/span><\/strong><\/span><\/p>\n
Click the <\/span>Internal<\/span><\/strong><\/span>Recording button to enable\/disable <\/span>Internal<\/span><\/strong><\/span>Recording.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
2. How to export the recorded audio files?<\/span><\/h3>\n
After disabling internal recording, connect the microphone to your phone or computer with a USB-C cable. Press and hold the <\/span>Internal<\/span><\/strong><\/span> Recording<\/span><\/strong><\/span> button for 5 seconds. When the recording indicator lights up orange, you can transfer the files to your device\uff08 It currently supports Windows, iOS and Android systems\uff09.<\/span><\/p>\n
For Windows PC<\/span><\/h4>\n
\n
\n
Connect the microphone to your computer using a USB A&C to USB-C cable.<\/span><\/p>\n<\/li>\n
\n
Press and hold the internal recording button on the microphone for 5 seconds, or enable USB drive mode in the Maono Link software. Make sure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, indicating USB drive mode is activated.<\/p>\n<\/li>\n
<\/li>\n
\n
Open <\/span>This PC<\/span><\/strong><\/span> and access the external storage device.<\/span><\/p>\n<\/li>\n
\n
Locate the recorded audio files and copy them to your device.<\/span><\/p>\n<\/li>\n<\/ul>\n
For Android Phones<\/span><\/h4>\n
\n
\n
Connect the microphone to your phone with a USB A&C to USB-C cable.<\/span><\/p>\n<\/li>\n
\n
Press and hold the internal recording button for 5 seconds. Ensure internal recording is disabled before activating USB drive mode. The microphone mute indicator will turn orange, meaning USB drive mode is enabled.<\/span><\/p>\n<\/li>\n
\n
Open the <\/span>Files<\/span><\/strong><\/span> app on your phone and open the connected external storage.<\/span><\/p>\n<\/li>\n
\n
You can find the recorded audio files here and copy them over.<\/span><\/p>\n<\/li>\n<\/ul>\n
For iPhone<\/span><\/h4>\n
\n
\n
Connect the microphone to your iPhone using a USB A&C to USB-C cable.<\/span><\/p>\n<\/li>\n
\n
Press and hold the internal recording button for 5 seconds. Ensure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, confirming USB drive mode is activated.<\/span><\/p>\n<\/li>\n
\n
Open the <\/span>Files<\/span><\/strong><\/span> app, then locate and open the external storage under Locations.<\/span><\/p>\n<\/li>\n
\n
Find your recorded audio files here and copy them to your phone.<\/span><\/p>\n<\/li>\n<\/ul>\n
3. What are the original and processed audio files from Internal Recording?<\/span><\/h3>\n
\n
\n
Original file<\/span><\/strong><\/span>: Raw audio recorded without any processing.<\/span><\/p>\n<\/li>\n
\n
Processed file<\/span><\/strong><\/span>: Audio optimized by algorithms, such as noise cancellation and EQ adjustments.<\/span><\/p>\n<\/li>\n<\/ul>\n
4. How to enable\/disable auto-recording on boot?<\/span><\/h3>\n
Open the device interface in Maono Link, locate <\/span>Internal Recording<\/span><\/strong><\/span>, tap <\/span>Settings<\/span><\/strong><\/span>, then enable or disable <\/span>Auto-recording<\/span><\/strong><\/span>.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
5. How to clear internal recording files when storage is full?<\/span><\/h3>\n
In the device interface of the software, find <\/span>Internal Recording<\/span><\/strong><\/span>, click <\/span>Format<\/span><\/strong><\/span>, and confirm.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
V. Battery, Indicators, and Status Display<\/span><\/h2>\n
1. The level meters in the software show no response, but recording works normally?<\/span><\/h3>\n
Check if the level meter switch is turned on.<\/span><\/p>\n
\u2460 Click the <\/span>Settings icon<\/span><\/strong><\/span> in the top-right corner of the software’s device interface.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
\u2461 Check whether the level meter switch is enabled.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
2. How do I check the microphone’s remaining battery level?<\/span><\/h3>\n
Connect the microphone, open Maono Link, and check the current battery level on the device page.<\/span><\/p>\n
3. Battery Life, Charging, and Power Management<\/span><\/h3>\n
Battery Life<\/span><\/strong><\/span>: The built-in lithium battery can operate continuously for approximately <\/span>60<\/span><\/strong><\/span> hours in wireless mode (battery life will be correspondingly shorter when onboard recording\/DSP is enabled). <\/span>Charging Method<\/span><\/strong><\/span>: Charge via the USB-C port using a standard 5V\/1A adapter or a computer USB port, and a full charge takes approximately <\/span>4<\/span><\/strong><\/span> hours. <\/span>Use While Charging<\/span><\/strong><\/span>: Supports use while charging. When connected to a computer via USB cable, the device will automatically charge at the same time. <\/span>Low<\/span><\/strong><\/span><\/p>\n
Battery Alert<\/span><\/strong><\/span>: When the battery level is below 10%, the power indicator will flash red, please charge it promptly to prevent abnormal interruption of onboard recording data.<\/span><\/p>\n
4. The PD500W has a built-in battery. Will battery aging eventually make the microphone unusable?<\/span><\/h3>\n
The PD500W's internal battery is primarily used for wireless operation. Even if the battery capacity gradually decreases after extended use, it does not mean the entire microphone becomes unusable. The PD500W can still be used through wired connections such as USB-C or XLR. To support both wireless runtime and long-term reliability, the PD500W uses a 3200mAh LG battery cell. Under controlled cycle-life testing, the battery is specified to retain at least 80% of its initial capacity after 1,000 full charge and discharge cycles. Like other lithium-ion batteries, its capacity will gradually decrease with age and repeated charging rather than suddenly failing after a fixed number of years. Cycle-life specification: tested at 25°C, with charging at 0.3C and discharging at 0.5C. Actual battery performance may vary depending on temperature, charging habits, product settings, and usage conditions.<\/span><\/p>\n
VI. Installation, Positioning, and Maintenance<\/span><\/h2>\n
1. How to restore default settings?<\/span><\/h3>\n
\u2460 Click the <\/span>Firmware Update<\/span><\/strong><\/span> icon in the top-right corner of the device interface.<\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
\u2461 Click <\/span>Factory Reset<\/span><\/strong><\/span><\/p>\n
$\"img\"$ <\/span><\/p>\n
The above image is for illustration purposes only.<\/span><\/em><\/span><\/p>\n
2. Can I remove the microphone body from the original yoke and reinstall it in the opposite orientation?<\/span><\/h3>\n
The microphone body cannot be removed from the original yoke. The PD500W features a hidden-cable yoke design with an integrated FPC ribbon cable inside. Attempting to remove or reverse the microphone body may damage the internal cable and the microphone. To adjust the microphone angle, please use the yoke's built-in angle adjustment.<\/span><\/p>\n
3. When using a boom arm, the control knobs end up facing downward and are difficult to access. How should I position the microphone?<\/span><\/h3>\n
If the controls face downward when the PD500W is mounted on a boom arm, we recommend positioning the microphone horizontally or at a side angle rather than mounting it upside down. This keeps the controls within easy reach without having to remove or reverse the microphone body in the yoke.<\/span><\/p>\n
4. The pop filter is very tight and difficult to remove. Is there an easier way to take it off?<\/span><\/h3>\n
The pop filter is designed with a secure fit to keep it firmly in place during use. To remove it, grip the pop filter around the mounting ring and gently twist it while pulling outward, similar to unscrewing a bottle cap. This should make it easier to remove than pulling it straight out. Avoid pulling on the mesh portion of the pop filter itself.<\/span><\/p>\n
5. How do I properly mount the PD500W to a microphone stand or boom arm with a 3\/8\" or 5\/8\" thread?<\/span><\/h3>\n
The bottom of the PD500W yoke supports both 3\/8\" and 5\/8\" threaded mounts. For a 3\/8\" mount, rotate the microphone and yoke assembly onto the stand until securely attached. For a 5\/8\" mount, use the adjustable adapter ring at the bottom and turn the ring clockwise until the microphone is securely mounted. To remove the microphone from the stand or boom arm, simply reverse the corresponding steps.<\/span><\/p>\n
6. My XLR cable blocks the boom arm adjustment. What should I do?<\/span><\/h3>\n
The PD500W package includes an approximately 3-inch extension pole for this purpose. Install the extension between the bottom of the microphone yoke and the boom arm to create additional clearance. This provides more room for the XLR connector and cable, preventing them from interfering with the microphone's angle adjustment.<\/span><\/p>\n
VII. Audio Specifications and Polar Pattern<\/span><\/h2>\n
1. What is the PD500W’s polar pattern?<\/span><\/h3>\n
The PD500W has a cardioid polar pattern. It primarily picks up sound from the front while reducing sound pickup from the sides and rear.<\/span><\/p>\n
2. PD500W Microphone Specifications<\/span><\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Microphone Type<\/span><\/span><\/th>\n Dynamic<\/span><\/span><\/th>\n<\/tr>\n<\/thead>\n
Polar Pattern<\/span><\/span><\/td>\n Cardioid<\/span><\/span><\/td>\n<\/tr>\n
Sensitivity<\/span><\/span><\/td>\n USB: -1.0 dBFS at 1KHz 89dBSPL 0.5m MAX GAIN XLR:-55dBV at 1KHz 94dBSPL 0.5m<\/span><\/span><\/td>\n<\/tr>\n
Noise Reduction<\/span><\/span><\/td>\n 3 Preset (Slight, Moderate, Aggressive) Custome (0~20, set on Maono Link)<\/span><\/span><\/td>\n<\/tr>\n
Max. SPL<\/span><\/span><\/td>\n USB: 128dB (0.5m Min Gain & Max Vol THD 10%) XLR: 147dB SPL (1kHz 94dB 0.5m)<\/span><\/span><\/td>\n<\/tr>\n
Frequency Response<\/span><\/span><\/td>\n 50-16000Hz<\/span><\/span><\/td>\n<\/tr>\n
Adjustable Gain Range<\/span><\/span><\/td>\n 0~+36dB<\/span><\/span><\/td>\n<\/tr>\n
Monitoring Sensitivity<\/span><\/span><\/td>\n -1.0dBV at 1KHz 89dBSPL 0.5m MAX GAIN&VOL<\/span><\/span><\/td>\n<\/tr>\n
Monitor The Headphone Jack<\/span><\/span><\/td>\n 3.5mm<\/span><\/span><\/td>\n<\/tr>\n
Digital Output<\/span><\/span><\/td>\n USB C<\/span><\/span><\/td>\n<\/tr>\n
Simulated Output<\/span><\/span><\/td>\n XLR<\/span><\/span><\/td>\n<\/tr>\n
Internal Recording Time<\/span><\/span><\/td>\n 55h (48kHz\/24bit)<\/span><\/span><\/td>\n<\/tr>\n
Output Impedance Of The Headphone Jack<\/span><\/span><\/td>\n 32 Ω<\/span><\/span><\/td>\n<\/tr>\n
Battery<\/span><\/span><\/td>\n 3200mAh, 3.7V (9.62Wh)<\/span><\/span><\/td>\n<\/tr>\n
Charging Power Supply<\/span><\/span><\/td>\n USB C, 5V=1A Max.<\/span><\/span><\/td>\n<\/tr>\n
Battery Usage Time<\/span><\/span><\/td>\n ~60h(Based on Maono laboratory tests)<\/span><\/span><\/td>\n<\/tr>\n
Wireless Working Distance<\/span><\/span><\/td>\n 100m Max.(under line-of-sight conditions, based on Maono laboratory tests)<\/span><\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>","pure_content":"Contents\n\n\nI. Device Connections and Software Setup\n\n\nII. Volume, Mute, and Headphone Monitoring\n\n\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n\n\nIV. Recording and File Management\n\n\nV. Battery, Indicators, and Status Display\n\n\nVI. Installation, Positioning, and Maintenance\n\n\nVII. Audio Specifications and Polar Pattern\n\n\nI. Device Connections and Software Setup\n1. How to connect the PD500W to a computer?\nIt supports two connection methods: wireless and wired.\n\n\nWireless Connection: Plug the wireless receiver into your computer's USB port. Power on the microphone. A solid green mute indicator light means pairing is successful.\n\n\nWired Connection: Use a USB-C cable to connect the Type-C port on the microphone to the USB port of your computer. The device will connect automatically, and no power-on operation is required.\n\n\n2. How to complete wireless pairing for PD500W Receiver\nPress and hold the microphone power button for 3 seconds to power on. After plugging the receiver into your device, the microphone will pair with the receiver automatically. The microphone mute indicator will change from flashing blue to solid green when pairing succeeds, and the corresponding indicator on the receiver will also stop flashing and stay lit. For dual-microphone connection (one wireless receiver paired with two microphones), both indicators on the receiver will remain steadily lit.\nManual Pairing\nIf the microphone fails to connect to the receiver after powering on, or the connection is interrupted due to anomalies, follow the steps below for manual pairing:\n\n\nPower off the microphone first, then press and hold the power button for 5 seconds to enter quick pairing mode. The microphone mute indicator will flash blue rapidly.\n\n\nReinsert the receiver into your device. Pairing is complete when the receiver indicator stays steady and the microphone mute indicator turns green.\n\n\n3. How many microphones can one receiver connect to at most?\nTwo. It supports up to one-to-two mode.\n4. How to tell TX1 and TX2 apart when two microphones are connected simultaneously?\nGo to the device page in Maono Link and open the RX General Settings , then enable microphone identification. Once activated, the mute indicator of TX1 will flash purple briefly, while the mute indicator of TX2 will flash cyan briefly.\n\nThe above image is for illustration purposes only.\n5. How do I set up audio input and output on my computer?\nAfter connecting the PD500W, open your computer\u2019s sound settings and select the appropriate input device:\n\n\nWireless receiver connection: Select Maono Wireless Mic RX.\n\n\nUSB cable connection: Select Maono PD500W Mic USB.\n\n\nOn Windows, go to Settings > System > Sound. On macOS, go to System Settings > Sound.\nIf your headphones are connected to the microphone and you want to hear computer audio through them, select the corresponding Maono device as your computer\u2019s audio output as well.\n6. How to Connect the PD500W to Your Audio Interface\nConnection Method: Use a standard 3-pin XLR female-to-male audio cable, plug one end into the XLR port on the bottom of the microphone, and connect the other end to a sound card, mixer, or audio interface.\nPower Requirements: The PD500W is a dynamic microphone, and there is no need to enable 48V phantom power in XLR mode. Enabling 48V generally will not damage the microphone, but it is recommended to turn it off to reduce potential noise.\n7. Do the microphone\u2019s buttons and sound effects work when using an XLR connection?\nWhen connected to a mixer or audio interface via XLR, the PD500W outputs an unprocessed audio signal. The microphone\u2019s onboard controls and digital sound effects do not affect the XLR output.\nAdjust gain and apply effects through your mixer, audio interface, or recording software.\nThe PD500W is a dynamic microphone and does not require 48V phantom power when connected via XLR.\n8. How do I select the PD500W in Adobe Audition?\nAfter connecting the microphone, open Audio Hardware settings in Adobe Audition and select the appropriate Maono input device:\n\n\nWireless connection: Maono Wireless Mic RX.\n\n\nUSB cable connection: Maono PD500W Mic USB.\n\n\n9. Where can I download Maono Link?\nVisit the software download page on the official Maono website and download the version of Maono Link for your device.\nMaono Link supports Windows, macOS, iOS, and Android. Download\n10. Maono Link Software Can't Detect the Device?\n\n\nMake sure to use a cable with data transfer capability (charging-only cables cannot transfer data).\n\n\nConfirm that the microphone is not in \u201cUSB drive mode\u201d (orange light status), after exporting the files, please press and hold the onboard recording button to exit USB drive mode before opening the software.\n\n\nTry unplugging and reconnecting the USB port or switching to a USB port on the back panel of the computer.\n\n\n11. The PD500W supports Mac, especially M-series chips.\nAfter multiple rounds of testing, functionality has been verified with no issues. Due to lower performance, Intel-series chips may experience issues with 192kHz recording.\nII. Volume, Mute, and Headphone Monitoring\n1. What are the functions of the knob on the microphone?\n Short press the knob to switch adjustment modes.\n\n\nWhen the mute indicator light is white: Gain adjustment mode. Turn the knob clockwise to increase microphone gain, and counterclockwise to decrease it.\n\n\nWhen the mute indicator light is blue: Headphone volume adjustment mode. Turn the knob clockwise to raise headphone volume, and counterclockwise to lower it.\n\n\n2. How to control monitor output?\nCheck Mic to monitor audio from the microphone. Check PC to monitor sound from your computer.\n\nThe above image is for illustration purposes only.\n3. How to adjust the headphone monitoring volume of the microphone?\n\u2460 Enter the device interface in Maono Link, find Microphone Monitor, and adjust the slider.\n\nThe above image is for illustration purposes only.\n\u2461 Short press the knob on the microphone. When the mute indicator light turns blue, you can adjust the headphone monitoring volume. Turn the knob clockwise to increase the volume.\n4. How to adjust the microphone speaking volume?\n\u2460 Go to the device interface in the software and adjust the Microphone gain. Higher gain delivers louder sound but also more background noise. Please set it to a proper level.\n\nThe above image is for illustration purposes only.\n\u2461 Short press the microphone knob. When the mute indicator light turns white, you can adjust the microphone gain. Turning the knob clockwise increases the gain.\n5. How to switch auto gain?\nLocate Microphone gain on the device interface in the software and enable Auto Gain. Select a suitable gear based on your distance to the microphone.\n\nThe above image is for illustration purposes only.\n6. How do I mute the microphone? Does setting the gain to 0 mute it?\nYou can mute or unmute the microphone in either of the following ways:\n\n\nTap the touch-sensitive mute button on the microphone.\n\n\nOpen the device page in Maono Link and click the microphone mute icon.\n\n\nSetting the gain to 0 does not mute the microphone. Gain controls how much the microphone signal is amplified. To mute the microphone, use the mute function.\nThese mute controls do not affect the XLR output.\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n1. How to enable noise cancellation?\n\u2460Enable via Maono Link\n\n\nOpen Maono Link\nOpen the software and enter the device interface.Four levels are available: Slight, Moderate, Aggressive and Custom.\nThey correspond to indicator lights on the side of the microphone: white, light green, green and orange.\n\n\nEnable via Maono Link\nTap the noise cancellation level options shown in the interface.\n\n\n\nThe above image is for illustration purposes only.\n\u2461 On the microphone\nShort press the noise cancellation button to cycle through modes: Slight \u2192 Moderate \u2192 Aggressive \u2192 Custom.\n\u2462 On the receiver\nShort press the noise cancellation button on the receiver to cycle through modes: Slight \u2192 Moderate \u2192 Aggressive \u2192 Custom.\n2. What are the functions of the compressor and limiter?\n\n\nCompressor: Stabilizes audio signals and prevents inconsistent volume levels.\n\n\nLimiter: Prevents audio clipping caused by excessive volume.\n\n\n3. What do Mono, Stereo and Safety Track below the level meter mean?\n\n\nMono: Combines audio signals into a single channel. The left and right channels output identical audio.\n\n\nStereo: When the receiver (RX) is connected to two microphones, the left and right channels will output separate tracks from each microphone respectively.\n\n\nSafety Track: Two audio streams are output on left and right channels. The left channel plays audio at the original volume, while the right channel serves as a backup track with volume reduced by 9dB.\nNote: The safety audio track is compatible with both the mobile receiver and camera receiver.\n\n\n4. How do I enable the digital pop filter?\nOpen Maono Link, go to the PD500W device page, and enable the digital pop filter.\n5. How do I select, customize, or reset a sound preset?\nOpen the device page in Maono Link and go to the sound presets section:\n\n\nSelect a preset: Choose an existing preset that suits your needs.\n\n\nCreate a custom preset: Click the option to create a new preset, then adjust the gain and Q value of each EQ band to fine-tune your sound.\n\n\nReset a preset: Open the preset\u2019s editing page and click Reset.\n\n\nStart with the default settings and make small adjustments while listening to the results. EQ helps refine your vocal tone; it cannot make your voice sound like someone else\u2019s.\n6. Should I choose Mono, Stereo, or Safety Track?\n\n\nMono: Suitable for calls, livestreams, and general recording. The same audio is sent to both the left and right channels.\n\n\nStereo: Suitable when two microphones are connected to one receiver and you want to edit each speaker\u2019s audio separately. Each microphone is assigned to a separate channel: one to the left and the other to the right.\n\n\nSafety Track: Useful when recording audio with large volume changes. The left channel carries the original audio level, while the right channel carries a backup signal that is 9 dB lower for use in post-production.\n\n\nFor recordings that will be played back directly with matching audio in both channels, choose Mono.\n7. Can I use Safety Track with one microphone? Why is the right channel quieter?\nYes. Safety Track can be used with a single microphone in wireless receiver mode.\nThe right channel is intentionally 9 dB quieter than the left channel. It provides a lower-level backup signal that you can use during editing.\nAvoid publishing the unedited Safety Track recording as your final stereo audio, as listeners will hear different volume levels in the left and right channels. Before publishing, select the appropriate track and adjust the final channel routing and audio level.\nIV. Recording and File Management\n1. How to enable Internal Recording?\n1. On the microphone\nShort press the InternalRecording button to start InternalRecording; the red indicator light on the side will turn on. Long press for 3 seconds again to stop recording.\n2. Via Maono Link software\nClick the InternalRecording button to enable\/disable InternalRecording.\n\nThe above image is for illustration purposes only.\n2. How to export the recorded audio files?\nAfter disabling internal recording, connect the microphone to your phone or computer with a USB-C cable. Press and hold the Internal Recording button for 5 seconds. When the recording indicator lights up orange, you can transfer the files to your device\uff08 It currently supports Windows, iOS and Android systems\uff09.\nFor Windows PC\n\n\nConnect the microphone to your computer using a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button on the microphone for 5 seconds, or enable USB drive mode in the Maono Link software. Make sure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, indicating USB drive mode is activated.\n\n\n\nOpen This PC and access the external storage device.\n\n\nLocate the recorded audio files and copy them to your device.\n\n\nFor Android Phones\n\n\nConnect the microphone to your phone with a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button for 5 seconds. Ensure internal recording is disabled before activating USB drive mode. The microphone mute indicator will turn orange, meaning USB drive mode is enabled.\n\n\nOpen the Files app on your phone and open the connected external storage.\n\n\nYou can find the recorded audio files here and copy them over.\n\n\nFor iPhone\n\n\nConnect the microphone to your iPhone using a USB A&C to USB-C cable.\n\n\nPress and hold the internal recording button for 5 seconds. Ensure internal recording is turned off before enabling USB drive mode. The microphone mute indicator will turn orange, confirming USB drive mode is activated.\n\n\nOpen the Files app, then locate and open the external storage under Locations.\n\n\nFind your recorded audio files here and copy them to your phone.\n\n\n3. What are the original and processed audio files from Internal Recording?\n\n\nOriginal file: Raw audio recorded without any processing.\n\n\nProcessed file: Audio optimized by algorithms, such as noise cancellation and EQ adjustments.\n\n\n4. How to enable\/disable auto-recording on boot?\nOpen the device interface in Maono Link, locate Internal Recording, tap Settings, then enable or disable Auto-recording.\n\n\nThe above image is for illustration purposes only.\n5. How to clear internal recording files when storage is full?\nIn the device interface of the software, find Internal Recording, click Format, and confirm.\n\nThe above image is for illustration purposes only.\nV. Battery, Indicators, and Status Display\n1. The level meters in the software show no response, but recording works normally?\nCheck if the level meter switch is turned on.\n\u2460 Click the Settings icon in the top-right corner of the software\u2019s device interface.\n\n\u2461 Check whether the level meter switch is enabled.\n\nThe above image is for illustration purposes only.\n2. How do I check the microphone\u2019s remaining battery level?\nConnect the microphone, open Maono Link, and check the current battery level on the device page.\n3. Battery Life, Charging, and Power Management\nBattery Life: The built-in lithium battery can operate continuously for approximately 60 hours in wireless mode (battery life will be correspondingly shorter when onboard recording\/DSP is enabled). Charging Method: Charge via the USB-C port using a standard 5V\/1A adapter or a computer USB port, and a full charge takes approximately 4 hours. Use While Charging: Supports use while charging. When connected to a computer via USB cable, the device will automatically charge at the same time. Low\nBattery Alert: When the battery level is below 10%, the power indicator will flash red, please charge it promptly to prevent abnormal interruption of onboard recording data.\n4. The PD500W has a built-in battery. Will battery aging eventually make the microphone unusable?\nThe PD500W's internal battery is primarily used for wireless operation. Even if the battery capacity gradually decreases after extended use, it does not mean the entire microphone becomes unusable. The PD500W can still be used through wired connections such as USB-C or XLR. To support both wireless runtime and long-term reliability, the PD500W uses a 3200mAh LG battery cell. Under controlled cycle-life testing, the battery is specified to retain at least 80% of its initial capacity after 1,000 full charge and discharge cycles. Like other lithium-ion batteries, its capacity will gradually decrease with age and repeated charging rather than suddenly failing after a fixed number of years. Cycle-life specification: tested at 25\u00b0C, with charging at 0.3C and discharging at 0.5C. Actual battery performance may vary depending on temperature, charging habits, product settings, and usage conditions.\nVI. Installation, Positioning, and Maintenance\n1. How to restore default settings?\n\u2460 Click the Firmware Update icon in the top-right corner of the device interface.\n\nThe above image is for illustration purposes only.\n\u2461 Click Factory Reset\n\nThe above image is for illustration purposes only.\n2. Can I remove the microphone body from the original yoke and reinstall it in the opposite orientation?\nThe microphone body cannot be removed from the original yoke. The PD500W features a hidden-cable yoke design with an integrated FPC ribbon cable inside. Attempting to remove or reverse the microphone body may damage the internal cable and the microphone. To adjust the microphone angle, please use the yoke's built-in angle adjustment.\n3. When using a boom arm, the control knobs end up facing downward and are difficult to access. How should I position the microphone?\nIf the controls face downward when the PD500W is mounted on a boom arm, we recommend positioning the microphone horizontally or at a side angle rather than mounting it upside down. This keeps the controls within easy reach without having to remove or reverse the microphone body in the yoke.\n4. The pop filter is very tight and difficult to remove. Is there an easier way to take it off?\nThe pop filter is designed with a secure fit to keep it firmly in place during use. To remove it, grip the pop filter around the mounting ring and gently twist it while pulling outward, similar to unscrewing a bottle cap. This should make it easier to remove than pulling it straight out. Avoid pulling on the mesh portion of the pop filter itself.\n5. How do I properly mount the PD500W to a microphone stand or boom arm with a 3\/8\" or 5\/8\" thread?\nThe bottom of the PD500W yoke supports both 3\/8\" and 5\/8\" threaded mounts. For a 3\/8\" mount, rotate the microphone and yoke assembly onto the stand until securely attached. For a 5\/8\" mount, use the adjustable adapter ring at the bottom and turn the ring clockwise until the microphone is securely mounted. To remove the microphone from the stand or boom arm, simply reverse the corresponding steps.\n6. My XLR cable blocks the boom arm adjustment. What should I do?\nThe PD500W package includes an approximately 3-inch extension pole for this purpose. Install the extension between the bottom of the microphone yoke and the boom arm to create additional clearance. This provides more room for the XLR connector and cable, preventing them from interfering with the microphone's angle adjustment.\nVII. Audio Specifications and Polar Pattern\n1. What is the PD500W\u2019s polar pattern?\nThe PD500W has a cardioid polar pattern. It primarily picks up sound from the front while reducing sound pickup from the sides and rear.\n2. PD500W Microphone Specifications\n\n\n\n Microphone Type\n Dynamic\n\n\n\n\n Polar Pattern\n Cardioid\n\n\n Sensitivity\n USB: -1.0 dBFS at 1KHz 89dBSPL 0.5m MAX GAIN XLR:-55dBV at 1KHz 94dBSPL 0.5m\n\n\n Noise Reduction\n 3 Preset (Slight, Moderate, Aggressive) Custome (0~20, set on Maono Link)\n\n\n Max. SPL\n USB: 128dB (0.5m Min Gain & Max Vol THD 10%) XLR: 147dB SPL (1kHz 94dB 0.5m)\n\n\n Frequency Response\n 50-16000Hz\n\n\n Adjustable Gain Range\n 0~+36dB\n\n\n Monitoring Sensitivity\n -1.0dBV at 1KHz 89dBSPL 0.5m MAX GAIN&VOL\n\n\n Monitor The Headphone Jack\n 3.5mm\n\n\n Digital Output\n USB C\n\n\n Simulated Output\n XLR\n\n\n Internal Recording Time\n 55h (48kHz\/24bit)\n\n\n Output Impedance Of The Headphone Jack\n 32 \u03a9\n\n\n Battery\n 3200mAh, 3.7V (9.62Wh)\n\n\n Charging Power Supply\n USB C, 5V=1A Max.\n\n\n Battery Usage Time\n ~60h(Based on Maono laboratory tests)\n\n\n Wireless Working Distance\n 100m Max.(under line-of-sight conditions, based on Maono laboratory tests)","is_draft":"0","editor_type":"3","file_path":"","add_time":"1780295977","update_time":"1794298610"},"pure_content":"Contents\n\n\nI. Device Connections and Software Setup\n\n\nII. Volume, Mute, and Headphone Monitoring\n\n\nIII. Noise Cancellation, Sound Effects, and Audio Track Settings\n\n\nIV. Recording and File Management"},{"id":"716820","string_id":"k5yJD9Cy","status":"1","parent_id":"716819","slug":"PD500W-Mobile-User-Guide","order":"3","name":"PD500W Mobile APP User Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"Zoffy","published_time":"1770431121","add_time":"1770088159","update_time":"1792563488","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"716820","content":"
<\/div>\n
\n
\n
Product Overview<\/span><\/h2>\n
The PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/div>\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\n
<\/span><\/p>\n
Product Functions<\/span><\/h2>\n
1. Connection<\/span><\/h3>\n
The receiver of the wireless microphone (Type-C\/Camera RX version) can be directly inserted into your phone's charging port. <\/span><\/p>\n
Open the Maono Link APP, and a microphone authorization prompt will pop up for the first use. Click \"OK\" to enable the microphone control functions. If authorization is denied or revoked, you will be unable to connect to Maono Link and configure the microphone settings.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
2. Device Switching<\/span><\/h3>\n
When two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
3. Battery Level Display<\/span><\/h3>\n
The current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
4. Mute Control<\/span><\/h3>\n
Tap the Mic icon (located on the far right) to instantly:<\/span><\/p>\n
\u25cf \ud83d\udd07 Mute the microphone<\/strong><\/span><\/p>\n
\u25cf \ud83d\udd0a <\/span>Unmute the microphone<\/span><\/strong><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
5. Microphone Gain<\/span><\/h3>\n
The microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.<\/span><\/p>\n
\u25cf Manual Gain<\/span><\/strong>:<\/strong> Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf Automatic Gain Control (AGC)<\/span><\/strong>: <\/strong>AWhen auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion. <\/span><\/p>\n
\n
\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.<\/span><\/em><\/p>\n<\/blockquote>\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
6. Noise Reduction<\/span><\/h3>\n
The PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.<\/span><\/p>\n
\u25cf Preset Noise Reduction<\/span><\/strong>: <\/strong>Offers three noise reduction levels—<\/span>Slight<\/span>, <\/span>Moderate<\/span>, and Aggressive—to adapt to different noisy environments.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf Custom Noise Reduction<\/span><\/strong>:<\/strong> If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from<\/span> 0 to 20<\/span>.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
7. Internal Recording<\/span><\/h3>\n
The internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed.<\/span><\/p>\n
\n
\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.<\/span><\/em><\/p>\n<\/blockquote>\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
7<\/span>.<\/span>1<\/span> Bit Depth<\/span><\/span><\/h4>\n
Set the audio bit depth for microphone internal recording. Two options are supported: 24Bit and 32 Bit Float.<\/span><\/p>\n
\u25cf 24 Bit<\/span><\/strong>:<\/strong> Standard audio bit depth, suitable for daily recording needs.<\/span><\/p>\n
\u25cf 32 Bit Float<\/span><\/strong>: <\/strong>Preserves more complete audio information, expanding the scope for post-audio processing.<\/span><\/p>\n
\n
\u26a0\ufe0fNote: Enabling 32 Bit float bit depth will increase the file size, thus shortening the total recording duration of the microphone.<\/span><\/em><\/p>\n<\/blockquote>\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
7.<\/span>2<\/span> File Type<\/span><\/span><\/h4>\n
Select the file type for saved internal recordings, with two options available:<\/span><\/p>\n
\u25cf Original File<\/span><\/strong>: <\/strong>Raw audio files without any algorithmic processing, retaining the complete original recording information.<\/span><\/p>\n
\u25cf Processed File<\/span><\/strong>: <\/strong>Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)<\/span><\/p>\n
\n
\u26a0\ufe0fNote: The bit depth and file type cannot be modified while internal recording is <\/span>enable<\/span>.<\/span><\/em><\/p>\n<\/blockquote>\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
7.<\/span>3<\/span> Internal Recording Settings<\/span><\/span><\/h4>\n
\u25cf Startup Auto Recor<\/span>ding<\/span>:<\/span> <\/strong>When enabled, the microphone will automatically start recording upon powering on.<\/span><\/p>\n
\u25cf Loop Recording<\/span><\/strong>: <\/strong>When enabled, the device will automatically overwrite the earliest recorded files when the TX storage space is full, continuously saving the latest audio content.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
7<\/span>.<\/span>4<\/span> File Export<\/span><\/span><\/h4>\n
Press and hold the microphone's internal recording button for 5 seconds to activate USB Drive Mode. Then, connect the microphone to a computer or phone via a USB cable to export the recorded files.<\/span><\/p>\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
7<\/span>.<\/span>5<\/span> Storage Space<\/span><\/span><\/h4>\n
With 24bit bit depth, the device supports up to <\/span>55.3<\/span> hours of recording. With 32 Bit Float bit depth, the supported recording duration is <\/span>45.2<\/span> hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\n
<\/p>\n
8. Compressor & Limiter<\/span><\/h3>\n
Basic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.<\/span><\/p>\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
9. Scenes<\/span><\/h3>\n
Multiple preset sound effect configurations are available, calibrated according to the product's features. <\/span>Custom configurations are not yet supported on m<\/span>obile devices. If you need to customize the configuration, please use the desktop version of Maono Link, which provides a full suite of graphical adjustment tools.<\/span><\/p>\n
\u25cf <\/span>Origina<\/span>l<\/span><\/span><\/h4>\n
1 basic presets to preserve original sound texture. <\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf <\/span>Stream<\/span><\/h4>\n
3 presets optimized for distinctive vocal effects during live broadcasts, ready for one-click use.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf <\/span>Recording<\/span><\/h4>\n
3 presets tailored for different voiceover genres.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf <\/span>Podcast<\/span><\/h4>\n
3 presets optimized for different vocal styles in podcast scenarios.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
10. Microphone Monitoring<\/span><\/h3>\n
The PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.<\/span><\/p>\n
1<\/span>0<\/span>.<\/span>1<\/span> Headphone Volume<\/span><\/span><\/h4>\n
Adjust the monitoring output volume of the current microphone with one click.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
1<\/span>0<\/span>.<\/span>2<\/span> Monitoring Output<\/span><\/span><\/h4>\n
Check the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.<\/span><\/p>\n
\u25cf <\/strong>Current Microphone<\/strong><\/span> (e.g., PD500W-1)<\/span>: Monitor your own voice.<\/span><\/p>\n
\u25cf Phone<\/span><\/strong>: <\/strong>Monitor background music, game audio, or call sounds (automatically disabled when phone speaker is activated).<\/span><\/p>\n
\u25cf Other Microphones <\/strong>(e.g., PD500W-2)<\/span>: Monitor your partner's voice.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
Typical Scenarios<\/span><\/em><\/p>\n
\u25cf Solo Use<\/span><\/strong><\/p>\n
Check \"Local Microphone\" and \"Phone\" to monitor both your own voice and background music simultaneously.<\/span><\/p>\n
\u25cf <\/strong>Two-Person Live Stream <\/strong>(with 2 PD500W microphones connected)<\/span>:<\/span><\/p>\n
\u25cb Check all audio sources to hear your own voice, your partner's voice, and phone audio at the same time.<\/span><\/p>\n
\u25cb Check \"<\/span>Current<\/span> PD500W<\/span>-<\/span>1<\/span>\" and \"Phone\" to only monitor your own voice and background sounds.<\/span><\/p>\n
\u25cb Gaming\/Media Playback Only<\/span>: Check only \"Phone\" to get pure audio output from the phone through the headphones.<\/span><\/p>\n
\n
\u26a0\ufe0fNote: To configure monitoring for the Camera RX, perform the settings directly on the Camera RX device.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
\n
<\/p>\n
11. De-Esser<\/span><\/h3>\n
Suppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre. <\/p>\n
\n
\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n
<\/p>\n<\/div>\n<\/div>\n
12. Electronic Pop Filter<\/span><\/h3>\n
Enabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
13. Mic Level Indicator<\/span><\/h3>\n
You can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.<\/p>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
14. Mute Lock<\/span><\/h3>\n
When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.<\/p>\n
\n
\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n
<\/p>\n<\/div>\n<\/div>\n
\n
<\/p>\n
13. General Functions<\/span><\/h3>\n
1<\/span>3<\/span>.<\/span>1<\/span> Channel Settings<\/span><\/span><\/h4>\n
\u25cf Mono<\/span><\/strong>:<\/strong> Merges audio signals into a single channel, with identical audio output from both left and right channels.<\/span><\/p>\n
\u25cf Stereo<\/span><\/strong>: <\/strong>When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.<\/span><\/p>\n
\u25cf Safety Track<\/span><\/strong>: <\/strong>Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.<\/span><\/p>\n
\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
1<\/span>3<\/span>.<\/span>2<\/span> Microphone Identification<\/span><\/span><\/h4>\n
When Microphone Identification is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
1<\/span>3<\/span>.<\/span>3<\/span> External<\/span> Output<\/span><\/span><\/h4>\n
When <\/span>External<\/span> Output<\/span> is enabled, sound will be played through the phone's built-in speaker. When disabled, it switches to headphone playback. You can connect 3.5mm headphones to the microphone's monitoring jack for audio monitoring.<\/span><\/p>\n
\n
\n
\n
\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
<\/div>\n<\/div>","pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.\n\n\n\n\n\n\n\n\n\n\n\u00a0\n\n\n\n\n\n\u00a0\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\nProduct Functions\n1. Connection\nThe receiver of the wireless microphone (Type-C\/Camera RX version) can be directly inserted into your phone's charging port. \nOpen the Maono Link APP, and a microphone authorization prompt will pop up for the first use. Click \"OK\" to enable the microphone control functions. If authorization is denied or revoked, you will be unable to connect to Maono Link and configure the microphone settings.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n2. Device Switching\nWhen two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n3. Battery Level Display\nThe current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n4. Mute Control\nTap the Mic icon (located on the far right) to instantly:\n\u25cf\u00a0\ud83d\udd07 Mute the microphone\n\u25cf \ud83d\udd0a\u00a0Unmute the microphone\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n5. Microphone Gain\nThe microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.\n\u25cf\u00a0Manual Gain: Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Automatic Gain Control (AGC): AWhen auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion.\u00a0\n\n\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n6. Noise Reduction\nThe PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.\n\u25cf\u00a0Preset Noise Reduction: Offers three noise reduction levels\u2014Slight, Moderate, and Aggressive\u2014to adapt to different noisy environments.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Custom Noise Reduction: If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from 0 to 20.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n7. Internal Recording\nThe internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed.\n\n\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.1 Bit Depth\nSet the audio bit depth for microphone internal recording. Two options are supported: 24Bit and 32 Bit Float.\n\u25cf\u00a024 Bit: Standard audio bit depth, suitable for daily recording needs.\n\u25cf\u00a032 Bit Float: Preserves more complete audio information, expanding the scope for post-audio processing.\n\n\u26a0\ufe0fNote: Enabling 32 Bit float bit depth will increase the file size, thus shortening the total recording duration of the microphone.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.2 File Type\nSelect the file type for saved internal recordings, with two options available:\n\u25cf\u00a0Original File: Raw audio files without any algorithmic processing, retaining the complete original recording information.\n\u25cf\u00a0Processed File: Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement.\u00a0(Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)\n\n\u26a0\ufe0fNote: The bit depth and file type cannot be modified while internal recording is enable.\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.3 Internal Recording Settings\n\u25cf\u00a0Startup Auto Recording: When enabled, the microphone will automatically start recording upon powering on.\n\u25cf\u00a0Loop Recording: When enabled, the device will automatically overwrite the earliest recorded files when the TX storage space is full, continuously saving the latest audio content.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.4 File Export\nPress and hold the microphone's internal recording button for 5 seconds to activate USB Drive Mode. Then, connect the microphone to a computer or phone via a USB cable to export the recorded files.\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n7.5 Storage Space\nWith 24bit bit depth, the device supports up to 55.3 hours of recording. With 32 Bit Float bit depth, the supported recording duration is 45.2 hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n8. Compressor & Limiter\nBasic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n9. Scenes\nMultiple preset sound effect configurations are available, calibrated according to the product's features. Custom configurations are not yet supported on mobile devices. If you need to customize the configuration, please use the desktop version of Maono Link, which provides a full suite of graphical adjustment tools.\n\u25cf Original\n1 basic presets to preserve original sound texture.\u00a0\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Stream\n3 presets optimized for distinctive vocal effects during live broadcasts, ready for one-click use.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Recording\n3 presets tailored for different voiceover genres.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf Podcast\n3 presets optimized for different vocal styles in podcast scenarios.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n10. Microphone Monitoring\nThe PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.\n10.1 Headphone Volume\nAdjust the monitoring output volume of the current microphone with one click.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n10.2 Monitoring Output\nCheck the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.\n\u25cf\u00a0Current Microphone (e.g., PD500W-1): Monitor your own voice.\n\u25cf\u00a0Phone: Monitor background music, game audio, or call sounds (automatically disabled when phone speaker is activated).\n\u25cf\u00a0Other Microphones (e.g., PD500W-2): Monitor your partner's voice.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\nTypical Scenarios\n\u25cf\u00a0Solo Use\nCheck \"Local Microphone\" and \"Phone\" to monitor both your own voice and background music simultaneously.\n\u25cf\u00a0Two-Person Live Stream (with 2 PD500W microphones connected):\n\u25cb\u00a0Check all audio sources to hear your own voice, your partner's voice, and phone audio at the same time.\n\u25cb\u00a0Check \"Current PD500W-1\" and \"Phone\" to only monitor your own voice and background sounds.\n\u25cb\u00a0Gaming\/Media Playback Only: Check only \"Phone\" to get pure audio output from the phone through the headphones.\n\n\u26a0\ufe0fNote: To configure monitoring for the Camera RX, perform the settings directly on the Camera RX device.\n\n\u00a0\n\n\u00a0\n11. De-Esser\nSuppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre.\u00a0\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\n12. Electronic Pop Filter\nEnabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n13. Mic Level Indicator\nYou can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n14. Mute Lock\nWhen enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\n\n\u00a0\n13. General Functions\n13.1 Channel Settings\n\u25cf\u00a0Mono: Merges audio signals into a single channel, with identical audio output from both left and right channels.\n\u25cf\u00a0Stereo: When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.\n\u25cf\u00a0Safety Track: Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.\n\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n13.2 Microphone Identification\nWhen Microphone Identification is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0\n13.3 External Output\nWhen External Output is enabled, sound will be played through the phone's built-in speaker. When disabled, it switches to headphone playback. You can connect 3.5mm headphones to the microphone's monitoring jack for audio monitoring.\n\n\n\n\n\n\n\n\n\n\n\n\n\nThe above image is for illustration purposes only.\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1770088159","update_time":"1792563488"},"pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams"},{"id":"717720","string_id":"PFS3PgTf","status":"1","parent_id":"716819","slug":"PD500W-User-Guide","order":"2","name":"PD500W User Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"Zoffy","published_time":"1770431126","add_time":"1770188783","update_time":"1792545159","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"716819\", \"595086\", \"593412\"]","content":{"content_id":"717720","content":"
<\/div>\n
\n
\n
Product Overview<\/span><\/h2>\n
The PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.<\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
Product Functions<\/span><\/h2>\n
1. Device Switching<\/span><\/span><\/h3>\n
When two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
2. Battery Level Display<\/span><\/span><\/h3>\n
The current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
3. Basic<\/span>s<\/span><\/span><\/h3>\n
3<\/span>.<\/span>1<\/span> Quick Control<\/span><\/h4>\n
Mute Switch: <\/strong>Quickly mute or unmute the microphone.<\/p>\n
<\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
Mute Lock Switch: <\/strong>When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.<\/p>\n
<\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>2<\/span> Microphone Gain<\/span><\/span><\/h4>\n
The microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.<\/span><\/p>\n
\u25cf Manual Gain<\/span><\/strong>: <\/strong>Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\u25cf Automatic Gain Control <\/strong>(AGC)<\/span>: When auto gain is enabled, it <\/span>automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion. <\/span><\/p>\n
\n
\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>3<\/span> Noise Cancellation<\/span><\/span><\/h4>\n
The PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.<\/span><\/p>\n
\u25cf Preset Noise Cancellation<\/span><\/strong>: <\/strong>Offers three noise reduction levels—<\/span>Slight<\/span>, <\/span>Moderate<\/span>, and Aggressive—to adapt to different noisy environments.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\u25cf Custom Noise Cncellation<\/span><\/strong>: <\/strong>If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from<\/span> 0 to 20<\/span>.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
3<\/span>.<\/span>4<\/span> Internal Recording<\/span><\/span><\/h4>\n
The internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed. The internal recording file is mono; stereo and safety track are not supported.<\/span><\/p>\n
\n
\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
Dual Mic Record<\/span><\/strong><\/h5>\n
When two PD500W microphones are connected simultaneously, single-mic or dual-mic recording modes are available.<\/span><\/span><\/p>\n
Single-mic mode only records the active microphone. Select dual-mic recording for synchronous internal recording of both mics, and both units will start capturing audio at the same time.<\/span><\/span><\/p>\n
<\/span><\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/span><\/span><\/p>\n
<\/p>\n
Bit Depth<\/span><\/strong><\/span><\/h5>\n
Set the audio Bit depth for microphone internal recording. Two options are supported: 24 Bit and 32-Bit Float.<\/span><\/p>\n
\u25cf 24 Bit<\/span><\/strong>: <\/strong>Standard audio Bit depth, suitable for daily recording needs.<\/span><\/p>\n
\u25cf 32 Bit Float<\/span><\/strong>: <\/strong>Preserves more complete audio information, expanding the scope for post-audio processing.<\/span><\/p>\n
\n
\u26a0\ufe0fNote: Enabling 32 Bit Float Bit depth will increase the file size, thus shortening the total recording duration of the microphone.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
File Type<\/span><\/strong><\/h5>\n
Select the file type for saved internal recordings, with two options available:<\/span><\/p>\n
\u25cf Original File<\/span><\/strong>: <\/strong>Raw audio files without any algorithmic processing, retaining the complete original recording information.<\/span><\/p>\n
\u25cf Processed File<\/span><\/strong>:<\/strong> Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)<\/span><\/p>\n
\n
\u26a0\ufe0fNote: The Bit depth and file type cannot be modified while internal recording is <\/span>enable<\/span>.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
Internal Recording Settings<\/span><\/strong><\/h5>\n
\u25cf Startup Auto Recor<\/span>ding<\/span>:<\/span> <\/strong>When enabled, the mic will automatically start recording upon powering on.<\/span><\/p>\n
\u25cf Low Power Auto Recording<\/span><\/strong>: <\/strong>When enabled, the mic will automatically start recording when the RX battery level drops to 10%, ensuring critical audio material is not lost.<\/span><\/p>\n
\u25cf Loop Recording<\/span><\/strong>:<\/strong> When enabled, the device will automatically overwrite the earliest recorded files when the mic storage space is full, continuously saving the latest audio content.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
File Export<\/span><\/strong><\/h5>\n
Connect the microphone to your computer or mobile device via a USB cable. Press and hold the internal recording button on the microphone for 5 seconds to enter USB drive mode (the microphone light strip will turn orange), then you can export audio files.<\/span><\/p>\n
USB drive mode can be exited by re-plugging the device, restarting the unit, or pressing and holding the internal recording button for another 5 seconds.<\/span><\/p>\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
\n
\u26a0\ufe0fNotes: USB drive mode cannot be activated during internal recording. You must manually stop internal recording first, then enter USB drive mode by either holding the mic recording button for 5 seconds or tapping the USB Mode button in the software.<\/em><\/p>\n<\/blockquote>\n
Storage Space<\/span><\/strong><\/h5>\n
With 24Bit Bit depth, the device supports up to 55.3<\/span> hours of recording. With 32-Bit Float Bit depth, the supported recording duration is 45.2<\/span> hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.<\/span><\/p>\n
<\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>5<\/span> De-Esser<\/span><\/span><\/h4>\n
Suppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre. <\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>6<\/span> Compressor & Limiter<\/span><\/span><\/h4>\n
Basic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>7<\/span> Electronic Pop Filter<\/span><\/span><\/h4>\n
Enabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.<\/span><\/p>\n
<\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3.8 Microphone Monitoring<\/span><\/h4>\n
The PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.<\/span><\/p>\n
<\/span><\/p>\n
Headphone Volume<\/span><\/strong><\/span><\/h5>\n
Adjust the monitoring output volume of the current microphone with one click.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
Monitoring Output<\/span><\/strong><\/span><\/h5>\n
Check the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.<\/span><\/p>\n
\u25cf Current Microphone<\/span><\/strong> (e.g., PD500W-1)<\/span>: Monitor your own voice.<\/span><\/p>\n
\u25cf Computer<\/span><\/strong>: <\/strong>Monitor background music, game audio, or call sounds.<\/span><\/p>\n
\u25cf Other Microphones <\/strong>(e.g., PD500W-2)<\/span>: Monitor your partner's voice.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>9<\/span> Mic Level Indicator<\/span><\/span><\/h4>\n
You can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.<\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
3<\/span>.<\/span>9<\/span> General Functions<\/span><\/span><\/h4>\n
Microphone Recognition<\/span><\/span><\/strong><\/p>\n
When Microphone Recognition is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain. Meanwhile, tapping the icon of a microphone will trigger two quick flashes on its identification indicator light for fast recognition of the corresponding mic.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
\n
<\/p>\n
4. Scenes<\/span><\/span><\/h3>\n
The software includes four preset scenes: \u200b\u200bOriginal\u200b\u200b, Stream<\/span>,<\/span> R<\/span>e<\/span>c<\/span>o<\/span>r<\/span>d<\/span>i<\/span>n<\/span>g<\/span> and \u200b\u200b<\/span>P<\/span>o<\/span>d<\/span>c<\/span>a<\/span>s<\/span>t<\/span>. Each scene includes optimized audio presets tailored to specific use cases. Select the scene that best matches your activity for an optimized audio experience. Clicking on any scene will automatically load its preset sound configuration.<\/span><\/p>\n
<\/p>\n
4.1 Sound configurations<\/span><\/h4>\n
Preset Sound Effects:<\/span><\/strong> <\/strong>Preset sound configurations cannot be modified. If the effects do not meet your expectations, click the \"Copy\" button to create a a fully customizable copy of the current configuration. This new configuration can then be tuned on-site. <\/span><\/p>\n
Custom Sound Effects:<\/span><\/strong> <\/strong>Under each scene, you can create multiple custom sound configurations. <\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
4.<\/span>2<\/span> Create New<\/span><\/span><\/h4>\n
You can create a new custom sound configuration by clicking the \"+\" button in the menu bar below the scene.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/span><\/p>\n
4<\/span>.<\/span>3 Deletion and Editing<\/span><\/span><\/h4>\n
The \"More\" menu supports the export and deletion of audio effect configurations.<\/span><\/p>\n
Hover the mouse over a custom audio effect box, and the Delete and Edit buttons will appear.<\/span><\/p>\n
Delete: <\/strong>Click \"Delete\" to directly remove the current audio effect configuration.<\/span><\/p>\n
Edit: <\/strong>Click \"Edit\" to open a pop-up window for adjusting the PEQ tuning of the current configuration.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
4.<\/span>4<\/span> EQ<\/span> Adjustment<\/span><\/span><\/h4>\n
Each audio effect configuration includes a graphical EQ tuning feature, comprising an HPF (High-Pass Filter), an LPF (Low-Pass Filter), and 10 bands. By dragging a band, you can directly boost or attenuate the gain at a specific frequency to quickly optimize the microphone's sound.<\/span><\/p>\n
You can click on a band or locate it in the parameter panel below to modify its filter type, gain, frequency, and Q value.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
When adjusting the EQ, you can monitor in real-time to hear the effect of the changes. Right-click on an EQ curve to perform actions such as copying, exporting, creating a new curve, or deleting it.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
The EQ Presets panel located in the bottom-right corner of the window provides menu options to create new or import audio effect configurations. Furthermore, right-clicking on any existing preset allows you to modify its curve appearance (thickness and color), rename it, or perform actions like copying and exporting the curve.<\/span><\/p>\n
You can export your own configurations to share with friends, or import sound effect files tuned for the PD500W by others. In the future, the official website will offer more scene sound effects for download, which can be used immediately with one-click import after downloading.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\n
<\/p>\n
5. Channel Settings<\/span><\/span><\/h3>\n
\u25cf Mono<\/span><\/strong>: <\/strong>Merges audio signals into a single channel, with identical audio output from both left and right channels.<\/span><\/p>\n
\u25cf Stereo<\/span><\/strong>:<\/strong> When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.<\/span><\/p>\n
\u25cf Safety Track<\/span><\/strong>: <\/strong>Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.<\/span><\/p>\n
\n
\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.<\/span><\/em><\/p>\n<\/blockquote>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\n
<\/p>\n
6. Recording<\/span><\/span><\/h3>\n
The default recording format is 48kHz\/16Bit, PCM format audio, and audio recorded can be exported to your destination folder.<\/span><\/p>\n
<\/span><\/p>\n
The above image is for illustration purposes only.<\/em><\/span><\/p>\n
<\/p>\n
\n
<\/span><\/p>\n<\/div>\n<\/div>","pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams. Two creators can each hold one microphone and connect to the live streaming platform synchronously through a single receiver without the need for an external sound card, simplifying the setup process for your creative scenes.\n\u00a0\n\n\u00a0\nProduct Functions\n1.\u00a0 Device Switching\nWhen two microphones are connected simultaneously, tap the top tab bar to switch between the microphones you want to configure.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n2.\u00a0 Battery Level Display\nThe current battery level of the microphones is displayed at the top of the app interface. When the battery is low, the microphone indicator light will flash rapidly. Please recharge the microphones in a timely manner.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n3.\u00a0 Basics\n3.1 Quick Control\nMute Switch: Quickly mute or unmute the microphone.\n\nThe above image is for illustration purposes only.\n\u00a0\nMute Lock Switch: When enabled, the mute touch key on the microphone light strip will be disabled to prevent accidental touches.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.2 Microphone Gain\nThe microphone supports both manual and automatic gain adjustment modes to meet different usage requirements.\n\u25cf\u00a0Manual Gain: Drag the slider to adjust the microphone input gain, with an adjustable range from 0 to 100.\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Automatic Gain Control (AGC): When auto gain is enabled, it automatically adjusts the microphone gain to ensure balanced sound output and prevent low volume or overload distortion.\u00a0\n\n\u26a0\ufe0fNote: Enabling Automatic Gain Control will affect the performance of the compressor and limiter, so these two functions will be temporarily disabled.\n\n\nThe above image is for illustration purposes only.\n\u00a0\n3.3 Noise Cancellation\nThe PD500W supports two noise reduction modes: Preset Noise Reduction and Custom Noise Reduction.\n\u25cf\u00a0Preset Noise Cancellation: Offers three noise reduction levels\u2014Slight, Moderate, and Aggressive\u2014to adapt to different noisy environments.\n\nThe above image is for illustration purposes only.\n\u00a0\n\u25cf\u00a0Custom Noise Cncellation: If the preset modes do not meet your needs, you can manually adjust the noise reduction level in Custom Noise Reduction mode, with an adjustable range from 0 to 20.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.4 Internal Recording\nThe internal recording function effectively prevents material loss caused by wireless interference or camera malfunctions. You can enable or disable this function at any time as needed. The internal recording file is mono; stereo and safety track are not supported.\n\n\u26a0\ufe0fNote: Internal recording cannot be enabled when the remaining recording time of the microphone is less than 30 minutes. Please export the audio files first and then perform the formatting operation.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nDual Mic Record\nWhen two PD500W microphones are connected simultaneously, single-mic or dual-mic recording modes are available.\nSingle-mic mode only records the active microphone. Select dual-mic recording for synchronous internal recording of both mics, and both units will start capturing audio at the same time.\n\nThe above image is for illustration purposes only.\n\u00a0\nBit Depth\nSet the audio Bit depth for microphone internal recording. Two options are supported: 24\u00a0Bit and 32-Bit Float.\n\u25cf\u00a024\u00a0Bit: Standard audio Bit depth, suitable for daily recording needs.\n\u25cf\u00a032\u00a0Bit Float: Preserves more complete audio information, expanding the scope for post-audio processing.\n\n\u26a0\ufe0fNote: Enabling 32 Bit Float Bit depth will increase the file size, thus shortening the total recording duration of the microphone.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nFile Type\nSelect the file type for saved internal recordings, with two options available:\n\u25cf\u00a0Original File: Raw audio files without any algorithmic processing, retaining the complete original recording information.\n\u25cf\u00a0Processed File: Audio files optimized by algorithms, such as noise reduction and scene sound effect enhancement. (Processed files cannot be saved at 32-bit float bit depth; only original files are available for saving.)\n\n\u26a0\ufe0fNote: The Bit depth and file type cannot be modified while internal recording is enable.\n\n\nThe above image is for illustration purposes only.\n\u00a0\nInternal Recording Settings\n\u25cf\u00a0Startup Auto Recording: When enabled, the mic will automatically start recording upon powering on.\n\u25cf\u00a0Low Power Auto Recording: When enabled, the mic will automatically start recording when the RX battery level drops to 10%, ensuring critical audio material is not lost.\n\u25cf\u00a0Loop Recording: When enabled, the device will automatically overwrite the earliest recorded files when the mic storage space is full, continuously saving the latest audio content.\n\nThe above image is for illustration purposes only.\n\u00a0\nFile Export\nConnect the microphone to your computer or mobile device via a USB cable. Press and hold the internal recording button on the microphone for 5 seconds to enter USB drive mode (the microphone light strip will turn orange), then you can export audio files.\nUSB drive mode can be exited by re-plugging the device, restarting the unit, or pressing and holding the internal recording button for another 5 seconds.\n\n\n\n\n\n\u00a0The above image is for illustration purposes only.\n\n\u26a0\ufe0fNotes: USB drive mode cannot be activated during internal recording. You must manually stop internal recording first, then enter USB drive mode by either holding the mic recording button for 5 seconds or tapping the USB Mode button in the software.\n\nStorage Space\nWith 24Bit Bit depth, the device supports up to 55.3 hours of recording. With 32-Bit Float Bit depth, the supported recording duration is 45.2\u00a0hours.To format the microphone's storage space, tap the \"Format\" button in the upper right corner of the interface.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.5\u00a0De-Esser\nSuppress harsh vocal sibilants (\/s\/, \/\u0283\/ and other hissing sounds), reduce piercing high-frequency harshness without impairing the overall timbre.\u00a0\n\nThe above image is for illustration purposes only.\n\u00a0\n3.6 Compressor & Limiter\nBasic compressor and limiter functions are provided. In most cases, adjusting the outer threshold will yield ideal results. For more precise adjustments, tap the \"More\" icon to enter the advanced settings window, where you can modify parameters such as compression ratio, limiting ratio, attack time, release time, and threshold.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.7 Electronic Pop Filter\nEnabling the electronic pop filter function helps reduce the impact of plosive sounds such as \"p\" and \"b\", aspirated sounds such as \"t\", \"k\", and \"h\", and high-speed airflow noise caused by close-distance recording on the audio quality.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.8 Microphone Monitoring\nThe PD500W is equipped with a 3.5mm headphone monitoring jack for real-time microphone monitoring, and supports multi-channel sound mixing to meet your needs from solo creation to multi-device collaboration.\n\u00a0\nHeadphone Volume\nAdjust the monitoring output volume of the current microphone with one click.\n\nThe above image is for illustration purposes only.\n\u00a0\nMonitoring Output\nCheck the audio sources you want to monitor through the current microphone. You can flexibly configure the monitoring output based on different creative scenarios. After checking the corresponding device option, the sound from that device will be output through the headphones.\n\u25cf\u00a0Current Microphone (e.g., PD500W-1): Monitor your own voice.\n\u25cf\u00a0Computer: Monitor background music, game audio, or call sounds.\n\u25cf\u00a0Other Microphones (e.g., PD500W-2): Monitor your partner's voice.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.9 Mic Level Indicator\nYou can toggle the microphone level switch on or off. When off, the microphone stops showing the level indicator in real time.\n\nThe above image is for illustration purposes only.\n\u00a0\n3.9 General Functions\nMicrophone Recognition\nWhen Microphone Recognition is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan when adjusting the microphone gain. Meanwhile, tapping the icon of a microphone will trigger two quick flashes on its identification indicator light for fast recognition of the corresponding mic.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n4.\u00a0 Scenes\nThe software includes four preset scenes: \u200b\u200bOriginal\u200b\u200b, Stream, Recording and \u200b\u200bPodcast. Each scene includes optimized audio presets tailored to specific use cases. Select the scene that best matches your activity for an optimized audio experience. Clicking on any scene will automatically load its preset sound configuration.\n\u00a0\n4.1 Sound configurations\nPreset Sound Effects: Preset sound configurations cannot be modified. If the effects do not meet your expectations, click the \"Copy\" button to create a a fully customizable copy of the current configuration. This new configuration can then be tuned on-site. \nCustom Sound Effects: Under each scene, you can create multiple custom sound configurations.\u00a0\n\nThe above image is for illustration purposes only.\n\u00a0\n4.2 Create New\nYou can create a new custom sound configuration by clicking the \"+\" button in the menu bar below the scene.\n\nThe above image is for illustration purposes only.\n\u00a0\n4.3 Deletion and Editing\nThe \"More\" menu supports the export and deletion of audio effect configurations.\nHover the mouse over a custom audio effect box, and the Delete and Edit buttons will appear.\nDelete: Click \"Delete\" to directly remove the current audio effect configuration.\nEdit: Click \"Edit\" to open a pop-up window for adjusting the PEQ tuning of the current configuration.\n\nThe above image is for illustration purposes only.\n\u00a0\n4.4 EQ Adjustment\nEach audio effect configuration includes a graphical EQ tuning feature, comprising an HPF (High-Pass Filter), an LPF (Low-Pass Filter), and 10 bands. By dragging a band, you can directly boost or attenuate the gain at a specific frequency to quickly optimize the microphone's sound.\nYou can click on a band or locate it in the parameter panel below to modify its filter type, gain, frequency, and Q value.\n\nThe above image is for illustration purposes only.\n\u00a0\nWhen adjusting the EQ, you can monitor in real-time to hear the effect of the changes. Right-click on an EQ curve to perform actions such as copying, exporting, creating a new curve, or deleting it.\n\nThe above image is for illustration purposes only.\n\u00a0\nThe EQ Presets panel located in the bottom-right corner of the window provides menu options to create new or import audio effect configurations. Furthermore, right-clicking on any existing preset allows you to modify its curve appearance (thickness and color), rename it, or perform actions like copying and exporting the curve.\nYou can export your own configurations to share with friends, or import sound effect files tuned for the PD500W by others. In the future, the official website will offer more scene sound effects for download, which can be used immediately with one-click import after downloading.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n5.\u00a0 Channel Settings\n\u25cf\u00a0Mono: Merges audio signals into a single channel, with identical audio output from both left and right channels.\n\u25cf\u00a0Stereo: When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.\n\u25cf\u00a0Safety Track: Outputs two audio files through left and right channels. The left channel is the original volume, while the right channel is a backup track with 9dB attenuation.\n\n\u26a0\ufe0f Note: Stereo and safety track configurations are unavailable when the microphone is connected via USB.\n\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0\n6.\u00a0 Recording\nThe default recording format is 48kHz\/16Bit, PCM format audio, and audio recorded can be exported to your destination folder.\n\nThe above image is for illustration purposes only.\n\u00a0\n\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1770188783","update_time":"1789891194"},"pure_content":"\u00a0\n\n\nProduct Overview\nThe PD500W microphone is Maono's new-generation wireless desktop microphone. It supports dual-microphone usage, making it an ideal solution for two-person podcasts or live streams"}],"content":{"icon":"","desc":"","content_id":"716819","add_time":"1770088141","update_time":"1779333826","content":"","is_traffic_less":"0","file_type":""},"hot_list":[],"user_read_num":"0","is_auth":"0"},"msg":"Success","code":200}

PD500W User Guide - Function Introduction<\/h2>\n\n<\/video><\/p>\n <\/p>\n

Maono Link App Functions for PD500W Hybrid Microphone<\/h2>\n\n<\/video><\/p>\n <\/p>\n

PD500W User Guide - Function Introduction<\/h2>\n
<\/p>\n

Maono Link App Functions for PD500W Hybrid Microphone<\/h2>\n
<\/p>\n