Note: Audio interface connected to the computer after the sound is small, no sound please see the following documents

Part 1：Troubleshooting the audio interface

1. Check that the audio cable interface is correct

l Connect the microphone to the audio interface using the XLR connector, making sure that the connection is tight and the connector is correct.

l Computer：Replace a USB port connection (please do not use a hub) ，If it is a PC, you need to plug the USB into the back end of the host

l Mobile Phone：Please replace the other audio cable, if you use an adapter cable, please confirm that the adapter cable is available

Tips：Using the phone recorder recording, in the recording, blow or tap on the microphone on the bottom of the phone, there is a level indicator is not successfully connected (reconnect or replace the audio cable).

白色的游戏机

中度可信度描述已自动生成

2. Adjust the audio interface knob

l Set to maximum to ensure sound card works properly

Turn your Gain knob to the 3 o'clock position.

Please turn your VOL knob to the maximum.

Please set the Phones fader to the maximum.

l Please adjust the USB&Stream out to the maximum --- Audio Output Control

(Note! Please keep it to the maximum to avoid forgetting)

l Condenser microphones need to turn on 48V (Note: After plugging in the microphone, click the button to turn on 48V)

l Please turn on your Direct Monitor button - it is lit!

Part 2：Troubleshooting Computer Audio Problems For Windows

Windows

Windows basic settings

STEP 1: Go to “Windows setting”.

STEP 2: Select “System”.

手机屏幕的截图

描述已自动生成图形用户界面, 应用程序, Word

描述已自动生成

STEP 3: Select “Sound” and go to “Sound Control Panel”.

STEP 4: Set Maonocaster C2 Neo as default recording device in “Recording” of sound setting.

STEP 5: Double click “Maonocaster C2 Neo” go to “Properties”, select “Levels” and set it to 100.

图形用户界面, 文本, 应用程序, Word

描述已自动生成

STEP 6: Set the Maonocaster C2 Neo as default playback device in “Playback” of sound setting.

l After the basic setup is successful, please use the recorder to record (if you don't have it, please download it through Microsoft store) and test if it is back to normal. If it does not work properly

Please contact：Support@maono.com

1. Advanced Software Setup

If you can use it on the Windows Voice Recorder, but not on the software or website, you can scan the QR code below to set it up

https://www.maono.com/pages/moanocaster-amc2-neo-audio-interface-manual-drive-download

Please contact us with any questions: Support@maono.com

macOS

1．macOS basic setting

Step 1: Click on Apple Logo in top-menu bar and select System Preferences in the drop-down menu.

Open System Preferences on Mac

Step 2: On System Preferences screen, click on the Sound tab.

Sound Settings Option on Mac

Step 3: On the next screen, switch to Input tab

Select your Maonocaster C2 Neo from the list and make sure the input volume is set to the maximum level.

After setting, input level will show you the input sound level

Click on the output tab

Select Maonocaster C2 Neo as the sound output

Adjust to maximum at output volume level

C2 NEO