What is the sampling rate and bit depth of the microphone？

48kHz/24Bit

Does the PD200X need to turn on 48v phantom power？

Not necessary, because the PD200X is a dynamic microphone

Correct the whistling sound coming from a mic?

That whistling sound is called an Audio feedback and caused because of an endless loop caused when the mic picks up the sound of the loudspeakers and sends it back to the loudspeakers to amplify and picks up again
Ways to correct /avoid feedback

Face the speakers away from the mic or place farther away.
Lower their volume or mic gain

Use unidirectional cardioid mics which have a rear rejection that means no pickup from back side. Then you can use stage monitors facing you in the middle of the stage. And mic won't pickup them.

Ring out the speaker - deliberately create feedback by taking the mic closer to the speaker. When feedback happens, check the frequency on a real-time analyser and cut it using channel eq or graphic eq.
Use a feedback reducer

How to set the microphone after connecting to the computer?

Please check the documentation

Microphone is not recognized on the PC?

Shut down and restart the computer and leave it for 20 minutes before connecting again
Update the driver in the device manager, uninstall the driver and re-insert the microphone
Use on another computer to see if it can be loaded, loaded out again after inserting the computer that can not be identified
Use the driver master, the brand comes with the software or the brand's official website to update the driver (such as Lenovo, Dell) to avoid the impact of missing drivers

USB Microphone not Working on Mac

Microphone does not work without sound on windows

Please turn the recording knob to a reasonable range
Please adjust the Mic gain knob to a reasonable range
Open microphone permission in privacy settings
Is the microphone device selection correct, please refer to the detailed documentation.

Please see the documentation for details

How to connect PD200X to Android and iOS

Android can be connected through OTG adapter or USB-C to USB-C data cable
iOS can be connected through the adapter cable provided by our company

Use PD200X feel small sound

PD200X is a dynamic microphone, relatively insensitive, the recommended distance is within 15CM
Please speak according to the direction shown to avoid the microphone not picking up the human voice

Using USB mode: Please check whether the microphone gain knob is in a reasonable position and whether the computer is using the device PD200X
Using XLR mode: please turn up the gain knob on the sound card, please check if the gain of the sound card is enough to push the microphone

Microphone has obvious current sound

Unplug the microphone data cable, replace the USB port and reconnect it (desktop computer to the USB behind the chassis, do not use a hub or docking station)
Stay away from audio and electronic products to avoid electronic signal interference. Change to a quiet environment to use the microphone, avoid external ambient sound being picked up by the microphone, troubleshoot the problem first
Turn off the use of third-party software, use the recorder that comes with the computer to test
May be the computer or plug board leakage, you can choose to replace a computer test

What is the low-cut function of the microphone and what does it do

Low-cut is a filter that removes low frequencies from the audio signal.
Frequencies below a defined frequency (usually between 20 Hz and 150 Hz) are removed from the filter, removing some of the low frequency noise for a cleaner sound

What are the power consumption parameters of PD200X

5V / 140mA-0.8W

Why the microphone XLR mode can not use the knob to control the sound, switch the sound effects

USB mode and XLR mode are completely separate, control the sound, light function is controlled by the USB mode, need power to use
XLR mode output for the pure original sound, switch and sound effects by the sound card control

Microphone has obvious humming sound

Microphone gain is too high, the microphone is sensitive, resulting in picking up more ambient sound, please reduce the microphone gain, it will improve the sound quality
PD200X is a condenser microphone, the microphone is sensitive, the microphone will pick up ambient sound while bringing more sound details, please keep a distance from your computer, cooling fan rotation and operation will generate noise
USB port or data cable is bad, please replace the connection cable or USB jack (desktop computer please connect to the USB port behind the case)

Microphone and Maono Link are not connected successfully

Please check the connection of the audio cable to the computer, unplug it and reconnect it
Check if the microphone works properly on the computer
If not resolved, please contact us via email:
support@maono.com