Microphone main
Receiver
PD200W — Unpaired / Not Connected
Please refer to the pairing guide to complete the connection.
The microphone indicator flashes.
The receiver indicator flashes.
💡Tips: When only one microphone is connected, only the corresponding indicator will light up after pairing. When two microphones are successfully connected, both indicators will remain on.
PD200W — Mute Status
Microphone Unit: The red indicator flashes quickly for about two seconds, then stays solid red, indicating the microphone is muted.
Receiver: The receiver will also display a red light simultaneously as a mute indicator.
PD200W — Adjusting Microphone Gain
When adjusting the microphone gain, the brightness of the knob ring indicator changes with the value. When the maximum or minimum level is reached, the indicator flashes quickly to show the limit has been reached.
PD200W — Adjusting Headphone Volume
When adjusting the headphone monitoring volume, the brightness of the knob ring indicator changes accordingly. When the maximum or minimum level is reached, the indicator flashes quickly as a boundary reminder.
PD200W — Noise Reduction Adjustment
When adjusting the noise reduction level, the knob ring indicator brightness changes with the setting. When the highest or lowest level is reached, the indicator flashes quickly to indicate the limit.
Dual-Mic Mode Indicator