Product Function
1. Connection
The receiver of the lavalier microphone (Type-C/Lightning) can be plugged directly into your phone’s charging port. When you open the Maono Link app for the first time, a microphone authorization prompt will appear. You must agree to grant access in order to enable microphone control features. If you deny authorization, you will not be able to adjust the microphone settings via Maono Link.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
T1 Pro supports simultaneous pairing with two receivers, allowing you to connect them to different devices, such as a phone and a computer. All audio data is synchronized in real time, making cross-device streaming smoother and more efficient.
2. Battery Indicator
The current microphone battery level is displayed at the top. Please place the microphone into the charging case in time when the battery is low.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
3. Mute Control
Tap the Mic icon (located on the far right) to instantly:
● 🔇 Mute the microphone
● 🔊 Unmute the microphone
The images above are for illustration purposes only, and the software may be subject to change in future updates.
4. Microphone Gain
Drag the slider to adjust the gain of microphone, with up to 20 levels available.
Note: The PD100W is a dynamic microphone. Select the appropriate gain level based on:
● Your speaking volume
● Distance from the microphone
The images above are for illustration purposes only, and the software may be subject to change in future updates.
5. Noise Reduction
DSP chip-level noise reduction with 3 adjustable levels. You can select the appropriate level based on the ambient noise conditions.
●Slight: Quiet environments (e.g., studio).
●Moderate: Moderate ambient noise (e.g., office)
●Aggressive: High-noise scenarios (e.g., outdoor events)
The images above are for illustration purposes only, and the software may be subject to change in future updates.
6. Sound Coloration
Sound Coloration is a core feature of the T1 Pro, equipped with four exclusive voice modes to optimize your recording and vocal experience.
Voice Enhancement：Accentuates the prominence of vocals in the mix while maintaining a natural and authentic listening experience.
Bright：Boosts vocal clarity and spatial presence, delivering a crisp, layered sound reminiscent of professional studio recordings or synthesizer effects.
Warm：Softens and wraps the voice, reproducing the gentle, textured quality of classic microphones and vinyl records.
Husky：Intensifies vocal expressiveness and appeal, adding distinctive character and depth.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
7. Reverb
10 preset reverb levels are available for quick adjustment based on personal preferences.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
8. Mic Recognition
When Microphone Recognition is enabled, the indicator light of Mic1 will turn purple and Mic2 will turn cyan.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
9. More Features
● Channel
Mono：Merges audio signals into a single channel, with identical audio output from both left and right channels.
Stereo：When two microphones are connected to the receiver (RX), the left and right channels will output independent audio tracks from each microphone respectively.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
● External Output
When External Output is enabled, sound will be played through the phone's built-in speaker. When disabled, it switches to headphone playback. You can use a Type-C analog headset for monitoring by plugging it into the microphone monitor jack.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
● Timed Shutdown
If the microphone remains unpaired after this function is enabled, it will automatically power off after 15 minutes to conserve battery.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
● Indicator Light
The indicator light is on by default. If it causes interference in certain scenarios, you can turn it off manually. Once turned off, it will automatically activate when the microphone disconnects or restarts.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
10. Firmware Update
When a new firmware version is detected, a red dot will appear on the corresponding icon in the upper-right corner as a reminder. Click this icon to access the firmware update page, then click the ‘Update‘ button to complete the process.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
⚠️Note: Ensure sufficient battery level before firmware update. Do not disconnect the USB cable or perform shutdown operations during the process. Any abnormal disconnection may cause update failure.
If the firmware update fails, please restart the device and try updating again.
If you encounter any issues, please contact the customer service of the store where you made the purchase, or call our official service hotline. We are here to provide you with technical support.
11. Restore Factory Settings
On the Firmware Update page, we provide the Restore Factory Settings function. This function is typically used during abnormal debugging to revert all parameters to their factory-default state.
The images above are for illustration purposes only, and the software may be subject to change in future updates.