Learning Maono Link App
Maono Link app provides DSP adjustment functions for the microphones, allowing you to control and adjust PD100W microphone. The adjustment panel offers controls in three sections: Basics, Scenes, and Lights. The Basic section contains the most common settings. The Scene section allows you to choose different microphone effects. The Lights section controls the mic's ambient RGB lighting.
📙Product Functions
1. Connection
The receiver of the wireless microphone (Type-C/Lightning/Camera RX version) can be directly inserted into your phone's charging port.
On first launch of Maono Link App, a microphone authorization prompt will appear.
Tap "Allow" to enable microphone control functions. If authorization is denied or revoked, you will be unable to connect to Maono Link and configure the microphone settings.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
2. Gain Adjustment
Drag the slider to adjust the gain of microphone, with up to 20 levels available.
⚠️Note: The PD100W is a dynamic microphone. Select the appropriate gain level based on:
● Your speaking volume
● Distance from the microphone
The images above are for illustration purposes only, and the software may be subject to change in future updates.
3. Mute Control
Tap the Mic icon (located on the far right) to instantly:
● 🔇 Mute the microphone
● 🔊 Unmute the microphone
The images above are for illustration purposes only, and the software may be subject to change in future updates.
4. Battery Indicator
Real-time battery status is displayed at the top. When the battery is low, the indicator light will provide an active alert. Please promptly recharge the microphone.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
5. Monitoring Volume
The PD100W supports 3.5mm analog output. You can drag the monitoring volume slider to adjust output level.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
6. Noise Reduction
DSP chip-level noise reduction with 3 adjustable levels. You can select the appropriate level based on the ambient noise conditions.
● Slight: Quiet environments (e.g., studio)
● Moderate: Moderate ambient noise (e.g., office)
● Aggressive: High-noise scenarios (e.g., outdoor events)
The images above are for illustration purposes only, and the software may be subject to change in future updates.
7. Scenes
PD100W has preset default scene. According to the characteristics of the product, we have tuned a variety of preset scenes respectively.
●GAME
Game configurations.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
●Stream
For live streaming scenarios that require distinctive vocal characteristics, we offer two dedicated presets that can be applied instantly with a single click.
●SING
For the singing scene, we have preset two configurations: pop and folk. These two configurations come with built-in reverb. If you need to adjust the reverb level by yourself, you can enable the custom reverb level. When switching between pop and folk, the system will apply the custom reverb level you have set.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
8. General Functions
Phone Speaker Output
When the Phone Speaker Output is turned on, the sound will be played through the phone's speaker. When it is turned off, it will automatically switch to the internal speaker.
You can monitor the sound by plugging 3.5mm headphones into the microphone's monitor port.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
Monitoring Output
The monitor output allows you to simultaneously monitor both the microphone input and audio from your phone. You can flexibly configure this based on different usage scenarios. By default, the system is set to mix the microphone audio and phone audio for monitoring.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
9. Lights
The PD100W microphone also has a lighting adjustment function. You can adjust the lighting mode, brightness, and colors.
The images above are for illustration purposes only, and the software may be subject to change in future updates.
Light
Mode: The light display modes include Fixed, Breathe, and Loop modes. You can set different modes according to your preferences.
Color: There are 8 preset colors. You can complete the setting of the microphone light by clicking on the color block.
Brightness: You can adjust the light brightness by dragging the brightness slider on the right. (The PD100W is a wireless microphone powered by battery. Excessive brightness will shorten the microphone's usage time.)
The images above are for illustration purposes only, and the software may be subject to change in future updates.