Product Overview
The PD200W Wireless Microphone is Maono's next-generation Desktop Wireless Microphone, compatible with the T1 Plus wireless lavalier microphone for collaborative use. Designed to adapt to diverse environments, it enables seamless switching between outdoor and indoor settings.
Application Scenes
Configuration 1
Using two PD200W microphones together is ideal for dual-host podcasts or streaming. Two content creators can each use one PD200W, sharing a single receiver. The audio from both microphones feeds directly into your live-streaming platform, eliminating the need for a sound card. This simplifies your setup significantly. You can adjust individual microphone volumes directly on the mic itself. For specific needs, you can even copy settings from one PD200W to the other with a single button press, dramatically streamlining your audio tuning.
Configuration 2
Pair the PD200W microphones with a T1 Plus Wireless Lavalier microphone. Use the lavalier microphone for recording during outdoor livestreaming or video shoots, then seamlessly switch back to the PD200W upon returning to your studio. The wireless lavalier microphone offers superior convenience outdoors, while the desktop mic delivers high-quality audio in your studio.
Learning Maono Link mobile app
The Maono Link software provides access to DSP functions for microphone adjustment. You can configure a connected microphone through its interface. The adjustment panel offers controls in three sections: Basic, Scene, and Light. The Basic section contains the most common settings. The Scene section allows you to choose different microphone effects. The Light section controls the mic's ambient RGB lighting. When you need to configure a different microphone, simply select its corresponding tab at the top of the control page. The target microphone will flash its lights to help you identify it.
Product Functions
1. Connection
The receiver of the wireless microphone (Type-C/Lightning/Camera RX version) can be directly inserted into your phone's charging port.
On first launch of Maono Link App, a microphone authorization prompt will appear. Tap "Allow" to enable microphone control functions.
2. Gain Adjustment
Drag the slider to adjust the gain of microphone, supporting up to 20 levels.
Note: The PD200W is a dynamic microphone. Select the appropriate gain level based on:
- Your speaking volume
- Distance from the microphone
3. Mute Control
Tap the Mic 1 or Mic 2 icon (far right) to instantly:
- 🔇 Mute the microphone
- 🔊 Unmute the microphone
4. Battery Indicator
Real-time battery status is displayed at the top.
Low battery alert: Place the microphone into the charging case immediately when the indicator turns red.
5. Monitoring Volume
PD200W → Supports 3.5mm analog output
T1 Plus → Supports Type-C analog output
- ❌ Digital audio headphones (e.g., some phone bundled Type-C earphones) are incompatible.
- ✔️ Use analog audio headphones (confirm headphone type before purchase)
Drag the monitoring volume slider to adjust output levels per microphone.
6. Noise Reduction
DSP chip-level noise reduction (PD200W/T1 Plus) with 3 adjustable levels:
- Slight: Quiet environments (e.g., studio)
- Moderate: Moderate ambient noise (e.g., office)
- Aggressive: High-noise scenarios (e.g., outdoor events)
7. Scenes
Both PD200W and T1 Plus have preset default scenes. According to the characteristics of the products, we have tuned a variety of preset scenes respectively.
T1 Plus
VLOG： We focus on adjusting human voice effects in different spatial environments.
Stream： Includes presets such as live-commerce, entertainment, and gaming for different streaming needs.
Singing： Adds reverb effect; custom reverb settings are available if preset effects don’t meet expectations.
PD200W
Podcast： Two preset configurations provided. Custom configurations supported only on desktop Maono Link.
Gaming： Game-specific configurations provided.
Singing： Two presets: pop and folk. Built-in reverb, customizable level available.
8. General Functions
Channel Settings
When the receiver (RX) is connected to two microphones, the two microphones can be used to form a stereo mode. Default is mono.
Phone Speaker Output
Turn on to play sound via phone speaker; off will route audio to internal speaker or headset based on mic model.
Indicator Lights
The indicator lights on the T1 Plus microphone panel are on by default. They can be turned off if needed and will auto-reactivate on disconnection or restart.
Monitoring Output
PD200W： Flexible input mix; default includes mic + phone audio.
T1 Plus： Settings sync across both units; monitor self or mixed audio from both mics. Default includes mic + phone.
9. Lighting
The PD200W microphone also has a lighting adjustment function. You can adjust the lighting mode, brightness, and colors.
Light Settings
Mode: Fixed, breathe, and loop
Color: 8 preset colors selectable
Brightness: Slide to adjust; high brightness shortens battery life