PS22 Lite Routing Tool（Driver must be installed to use PS22 Lite）

With this drive, the sound card can be recognized and used on the computer. It is a necessary driver for using PS22 Lite on the computer.

Download

PS22 Lite software driver installation failed

Please close your anti-virus software and then reinstall the driver.

PS22 Lite has no Bluetooth function, no reverb, no noise reduction function

PS22 Lite is a sound card designed for recording, if you need sound effects, please add them in your DAW.

PS22 Lite doesn't have software driver for MacOS version

MacOS built-in driver, no need to install, you can use it directly.

What DAWs are available and how do I download them

There are PreSonus Studio One, Cockos Reaper 6, Ableton Live, FL Studio, Apple Logic Pro, Steinberg Cubase, you can visit the official website to download the software.

What does the 3.5mm jack on the PS22 Lite do

3.5mm TRS output - Copy the main output signal. Can be used to connect to headphones for real-time monitoring through TRS to TRS cables (not included).

How do I connect a smartphone to the PS22 Lite

You can connect your phone to the PS22 Lite using the USB-C socket.

Note: iOS only supports iPhone 15, iPhone 16 and above.

The power indicator is off

Using USB-C interface to connect mobile phones or computer devices while supplying power to the sound card.

How to distinguish and use the interface of PS22 Lite

1. Microphone/line input (computer device name MIC1) - XLR combination socket. Connect microphone or line level input. Supports XLR and ¼ inch (6.35mm) sockets. Connect the microphone using an XLR plug; Connect the line level input using a TS or TRS ¼ inch (6.35mm) plug. To protect the circuit, 4-inch (6.35mm) microphone input is not supported. Please use XLR-XLR cable to connect the microphone.

2. Instrument Input (Computer Device Name MIC2) - Supports 4-inch (6.35mm) TS plug input.

3. Monitor output L and R-2x ¼ inch (6.35mm) TRS sockets for active speakers; Supports ¼ inch TRS (balanced connection) or TS (unbalanced connection) plugs.

4. USB-C - connects to a computer or mobile device while providing data transfer and power.

5.3.5mm headphone jack - Use a 3.5mm TRS or TRRS plug to connect headphones or earphones. Please note that microphone input for headphones is not supported. The socket is located on the right side of the device.

How to distinguish the light indication and functional status of PS22 Lite

6. Microphone/line (computer device name MIC1) and instrument (computer device name MIC2) gain knobs and LED indicator lights - Use the corresponding knobs to adjust the preamplifier gain of microphone/line input and instrument input. LED has three colors: white when connected to the input, pink when the signal is close to clipping, and red when clipping. To prevent clipping, reduce the gain and keep the input in the green and pink areas.

7.48V Phantom Power Switch and LED Indicator - Press the switch to enable or disable the 48V Phantom Power for microphone input. When Phantom Power is enabled, the LED indicator light turns white. Please note that phantom power can only be enabled when connecting an XLR microphone. Usually, only condenser microphones require the use of phantom power. It is important to avoid turning on phantom power when not needed, as it may damage the microphone. If you are unsure about the type of microphone, it is recommended to contact the manufacturer for confirmation.

8. Direct monitoring switch and LED indicator light - simply press the button to enable or disable real-time monitoring of microphone and instrument inputs. When enabled, the mix of microphone input and instrument input will be transmitted to the left and right channels of the headphones and monitor output. The LED indicator light turns white, indicating that the director's listening function has been enabled.

9. Monitor level adjustment and LED indicator light - Use this knob to adjust the monitor L and R output levels at the rear of the device. The LED indicator light turning white indicates that the PS22 Lite is powered on.

10. Earphone level adjustment and LED indicator light - Use this knob to adjust the level of the headphone jack on the right side of the device. LED indicator light displays device status:
Blue: PS22 Lite is powered on, but no data connection detected.
Green: USB data connection detected.
Purple: USB data connection detected, device in instrument live streaming mode.