1、How to download Maono Link?
A: Click the link below to download Maono Link
Click to download 🔻https://www.maono.com/products/maono-link-software?currency=CNY
2、How to charge PM450 GEN2?
A: PM450 GEN2 has no built-in battery and does not require charging.
3、How to power on PM450 GEN2?
A: The PM450 GEN2 does not feature an internal battery and requires no charging. Connect the USB-C port on the bottom of the PM450 GEN2 to a computer or smartphone via a data cable to power the unit up for operation. Upon successful connection, the indicator light on the Gain & Headphone Volume Knob with Function Buttons will remain illuminated.
4、 How to quickly mute the microphone?
A: 1. Short press the mute button on the top of the microphone;
5、How to adjust microphone gain and switch gain modes?
A: This microphone supports two gain adjustment modes: Manual Gain and Auto Gain (AGC).
- Manual Gain: Slide the slider to adjust the microphone input gain, with an adjustable range of -18dB to 18dB.
- Auto Gain (AGC): When enabled, it automatically adjusts the microphone gain to deliver balanced audio output and prevent low volume or clipping distortion. The Compressor and Limiter settings will be temporarily disabled while this function is active.
6、How to turn on Noise Cancellation?
A: 1. Short press the Noise Cancellation button on the top of the microphone to toggle the function. It cycles through modes in this sequence: Slight → Moderate → Aggressive → Custom Noise Cancellation → Off;
7、 How many noise cancellation modes and levels are available?
A: The PM450 Gen2 features two noise cancellation modes: Preset and Custom.
- Preset Noise Cancellation: It comes with three built-in intensity levels — Slight, Moderate and Aggressive — to fit various noisy environments.
- Custom Noise Cancellation: If the preset levels fail to meet your demands, you can manually adjust the noise cancellation intensity in Custom mode, with an adjustable range from 0 to 100.
8、What are the indicator light color differences for each noise cancellation level and mode?
9、How to turn on Reverberation?
A: 1. Press and hold the Noise Cancellation button on the top of the microphone for 4 seconds to toggle Reverberation on or off;
2. You can also manually enable the Reverberation function on the Basics tab of Maono Link.
10、How many reverberation modes and levels are available?
- Preset Reverberation: The microphone comes with 10 built-in reverberation levels for quick adjustment according to your needs.
- Custom Reverberation: If the preset effects cannot meet your requirements, you can enable Custom mode to fine-tune the reverberation effect precisely.
11、How to adjust the Compressor?
A: When the input volume exceeds the set threshold, the Compressor will reduce the signal amplitude at the specified compression ratio, stabilizing fluctuating audio volume for a smoother listening experience. For typical vocal recording scenarios, set the threshold between -18dBFS and -12dBFS.
12、How to adjust the Limiter?
A: The Limiter can be regarded as an extreme form of Compressor. Its core function is to prevent audio signal overload, protect your equipment and eliminate clipping distortion. The recommended threshold range for the Limiter is -6dBFS to -3dBFS.
13、How to adjust the microphone monitoring volume?
A: You can adjust the headphone monitoring output volume of the microphone with a single slider control.
14、How to enable real-time monitoring of microphone audio?
A: On the Basics tab of Maono Link, check the box labeled Mic (PM450 Gen2) under the Monitor Output section.
15、How to enable real-time monitoring of computer system audio?
A: On the Basics tab of Maono Link, check the box labeled Computer under the Monitor Output section.
16、How to use Bluetooth Backing Track?
A: First, turn on the Bluetooth Backing Track toggle switch in Maono Link. Next, search for and connect to the Bluetooth device named "Maono PM450 Gen2 BT" on another mobile phone or computer, then you can play backing tracks via that device.
Note: The Bluetooth connection only transmits backing tracks; your live vocal audio cannot be output through Bluetooth.
17、How to adjust the volume of Bluetooth Backing Track?
A: The Bluetooth backing track volume is adjustable from level 0 to 100, allowing you to set it according to your personal preference.
18、 How to turn on Ducking?
19、How to turn on the electronic Pop Filter?
20、How to tune the microphone audio effects?
A: Switch to the Scenes tab in Maono Link, then click the + New button to create a custom tuning preset.
21、How to import new audio effects?
A: Navigate to the Scenes tab in Maono Link, select your target scene preset, click + New to create a custom EQ scene, then hit the Import button. You may select locally saved audio effect files or shared effect files from others to import.
22、How to copy an audio effect preset?
A: On the EQ audio effect editing page, click the more options icon, then select Copy.
23、How to export an audio effect preset?
A: On the EQ audio effect editing page, click the more options icon, then select Export.
24、How to change the color tag of an audio effect preset?
A: On the EQ audio effect editing page, click the more options icon, then select Color Label.
25、How to delete an audio effect preset?
A: On the EQ audio effect editing page, click the more options icon, then select Delete.
26、How to reset an audio effect preset?
A: On the EQ audio effect editing page, click the Reset button to restore the preset to its original state.
27、How to adjust microphone gain with the multi-function knob?
A: In default mode, the knob controls microphone gain by default, and the knob indicator light glows white.
28、How to adjust headphone volume with the multi-function knob?
A: Short-press the knob to switch to headphone volume adjustment mode, and the knob indicator light will turn blue.
29、Why does the Bluetooth backing track volume remain unchanged even after I turn down the headphone volume?
A: The volume of Bluetooth backing tracks is controlled by the dedicated volume slider under the Bluetooth Backing Track section, independent of the headphone monitoring volume.
30、How to perform firmware update?
A: On the Maono Link Basics page, click the menu icon at the top right corner and select Firmware Update. If a new firmware version is available, click the Update button to start the upgrade process.
31、How to perform Factory Reset?
A: On the Basics page of Maono Link, click the menu icon at the top right corner and select Firmware Update, then click Factory Reset to restore factory settings.
32、How to turn off the level meter display?
A: On the Basics page of Maono Link, click the menu icon at the top right corner and select Settings. In the Level Switch section, choose the Off option to disable the level meter display.
33、How to connect and use the microphone with a computer?
A: Connect the microphone to your computer via the included USB cable, then complete the system audio configuration following the guides below.
Windows 11 Setup Guide
- Right-click the speaker icon in the bottom-right corner of the desktop, then select Sound settings.
- Scroll down and click More sound settings.
- Under the Playback tab, select PM450 GEN2 and set it as the default playback device.
- Switch to the Recording tab, select PM450 GEN2 and set it as the default recording device.
- Double-click PM450 GEN2, adjust the volume level to 100, then click OK to save settings.
MacOS Setup Guide
- Click the Apple icon at the top-left corner of the screen.
- Open System Settings (System Preferences).
- Select Sound from the menu list.
- On the Input tab, choose PM450 GEN2 and turn the input volume to maximum.
- Switch to the Output tab, select PM450 GEN2, and adjust the output volume according to your personal needs.
34、What is the polar pattern of PM450 GEN2?
35、Can the PM450 GEN2 be used with an audio interface?
A: Yes. The PM450 GEN2 is equipped with an XLR port, which allows it to be connected to an audio interface for use.
36、The PM450 GEN2 is connected to the audio interface with an XLR cable, yet it cannot pick up human voice.
A: The PM450 GEN2 is a condenser microphone, so you need to switch on the 48V phantom power supply.
37、Which operating systems are supported by the PC version of Maono Link?
A:Windows: Windows 10 (version 1809 and above), Windows 11 (32-bit & 64-bit).
Mac: macOS 13.5 and above.
38、What is the maximum recording duration supported by the PC version of Maono Link?
A: The maximum recording length is one hour. For recordings longer than one hour, it is recommended to use dedicated audio recording software.
39、What audio format do exported recordings from the PC version of Maono Link use?
A: The exported audio files are in WAV format.
40、What to do if the computer fails to recognize the microphone?
A:For computers: Check if PM450 GEN2 appears in your computer's audio settings. If it does not show up, try switching to another USB port or USB cable, then re-plug the microphone. If the issue persists, uninstall and reinstall the microphone driver. For detailed steps, refer to the guide: Windows PC Fails to Recognize Audio Interface or Microphone - Maono.
For mobile phones: Check whether the microphone indicator light is on. If no light is visible, replace the USB cable and verify that the OTG function of your phone is enabled.
41、The microphone is connected but produces no sound on the computer
A:Confirm that the microphone is properly plugged into the computer’s USB port (rear USB ports of the desktop case are recommended to avoid insufficient power supply).
Open the computer’s "More sound settings", set PM450 GEN2 as the default recording device. Ensure the recording volume is not muted and the input level is adjusted appropriately, disable exclusive mode, and grant microphone access permission to your apps under privacy settings.
If the problem remains unresolved, refer to the guide link: Windows PC Detects Audio Interface/Microphone but No Sound Output - Maono.
42、How to solve noise and static issues of the microphone?
A: You can check the solutions via the link: https://faq.maono.com/docs/microphone-noise#2._Electrical_or_Interference_Noise
For electrical buzzing ("hissing sound"): Check if the microphone is placed too close to devices with strong electromagnetic interference such as routers and induction cookers. Keep a distance of more than 1 meter. Replace the USB cable or USB port to eliminate line interference.
For ambient hum ("buzzing sound"): Turn on the noise reduction function built in the microphone or Maono Link software. Use a pop filter to reduce wind noise. Use the mic in a quiet environment to avoid background interference.
43、How to select PM450 GEN2 microphone for recording in professional audio recording software?
A: Take Adobe Audition as an example. After launching the recording software, go to Edit > Preferences > Audio Hardware.
Under Default Input, select PM450 GEN2 as the input device. Click OK to confirm, then you can record audio with the PM450 GEN2 microphone in the software.
44、Troubleshooting: Maono Link cannot be downloaded, fails to launch or crashes constantly
A:
- Check if your computer runs a compatible supported operating system (Windows or macOS).
- Fully uninstall the software by running the Uninstall program located in its installation folder, then re-download and install the latest official version.
- Disable your computer’s antivirus software and firewall temporarily, as they may block the program’s running processes.
- It is recommended to install the software to the default installation path (Local Disk C).
45、How to distinguish the indicator light colors for mic gain and headphone volume modes?
46、What are the detailed specifications of the PM450 GEN2?
47、What is the correct operation method for PM450 GEN2?
A：Face your mouth directly towards the Pop Filter. The optimal distance is within 30 cm; distances over 50 cm are not recommended.
48、What are the differences between USB connection mode and XLR connection mode?
A:
USB Mode
Plug-and-play without extra equipment. It can be connected to computers, tablets, mobile phones and other devices, suitable for live streaming, voice calls and simple recording. You can directly adjust volume and monitoring via the supporting software, and all built-in functions of the microphone work normally.
XLR Mode
It requires an external audio interface or mixer, delivering more stable audio signal transmission with better sound quality, ideal for professional recording studios and stage performances. It is normal that the indicator light on the microphone turns off and the physical knob becomes unresponsive under this mode.
Note: In XLR mode, microphone gain, headphone volume, mute function, knob indicator lights and RGB lighting will be unavailable. All audio parameters are controlled by the sound card.