Functional Outline
● Multifunctional: The DGM20 microphone connects via USB and supports multiple digital audio sampling rates by default: 48kHz/24-bit, 96kHz/24-bit, and 192kHz/24-bit. Its built-in noise cancellation function remains effective even at high sampling rates like 192kHz.
● Compatibility: The microphone connects via USB-C to Windows and macOS devices. The Maono Link software can be installed on the Windows system for device tuning and will soon support the macOS system.
● Advanced DSP Functions: Through Maono Link, functions such as microphone muting, noise reduction, and sound enhancement can be quickly adjusted.
1. Noise Cancellation
The noise cancellation function supports 0-100 level adjustment, allowing you to set the optimal noise cancellation intensity based on the ambient noise conditions.
The above image is for illustration purposes only.
2. Vocal Enhancement
When Vocal Enhancement is enabled, the overall sound of the microphone will be enhanced, and the human voice will be more prominent.
The above image is for illustration purposes only.
3. Monitoring Switch
You can turn on/off the monitoring function using the monitoring switch.
The above image is for illustration purposes only.
4. Recorder
By default, recording adopts a 48 kHz/16-bit sampling specification with WAV audio format. You can preview your recordings here and directly export the audio files once recording is complete.
The above image is for illustration purposes only.
5. Firmware Update
Click on the option in the upper right corner to open the option menu. Here, you can click on "Firmware update" to detect new firmware updates.
The above image is for illustration purposes only.
5.1 Update Processing
When there is a new firmware update available, the specific version that needs to be updated will be displayed. You can click on "Firmware update" to start updating the new firmware. After the update is completed, please reconnect the microphone once so that the new firmware can take effect.
The above image is for illustration purposes only.
⚠️Attention:Do not unplug the USB when updating. Abnormal disconnection will cause the update to fail and make the device unusable. Please operate according to the update prompts.
If you encounter a situation where the firmware update fails, just click "Retry". If you have any problems, please contact us in a timely manner through the customer service of the store where you purchased the product or via our official phone channels.
5.2 Restore factory settings
On the firmware update page, we provide the function of restoring factory settings. It is usually used when you encounter abnormal debugging so as to restore all parameters to the factory state.
The above image is for illustration purposes only.